Abstract:Abstract Liquid nitrogen (LN 2 ) fracturing is recognized as an innovative reservoir enhancement technique, demonstrating significant potential in establishing high permeability pathways in geothermal development. Understanding the physico-mechanical properties and microscopic mechanisms of hot dry rock post LN 2 cooling treatment is pivotal for promoting the effective deployment of LN 2 fracturing. This study undertook physical and mechanical testing on a quintessential hot dry rock type-granite-post various temperature and LN 2 cooling treatments. Subsequently, a multi-scale investigation was conducted on the thermal fracture-pore structure's morphological features and the evolution of mineral components. The experimental findings indicated that LN 2 cooling exerts a pronounced impact on the physico-mechanical properties of high-temperature granite. Temperature-induced damage to granite can be delineated into three phases: initial phase up to 200 °C where its effects are relatively imperceptible; an intermediate phase from 200 to 500 °C characterized by gradual deterioration; and a pronounced degradation phase evident at 600 °C. Correlations between the changes in the micro pore-fracture structure of granite and its physico-mechanical property degradation were subsequently established. As temperature escalated, the area of micro-defects in the CT-reconstructed spatial distribution increased progressively. The volumetric porosity damage ratio and fractal dimensions were quantitatively introduced to characterize the fractal geometric features and distribution patterns of internal thermal fractures in granite post thermal shock. Concurrently, NMR experiments indicated that with the escalation of temperature, micropore develop and interlink to form mesopore and macropore, enhancing rock porosity connectivity. These macropores significantly influence granite's physico-mechanical and permeability characteristics. A mineral stability analysis revealed that various minerals undergo physico-chemical reactions, such as dehydration, phase transitions, decomposition, and chemical bond fractures at elevated temperatures, altering mineralogical composition and mineral strength, thus impacting the rock's macroscopic properties. Ultimately, the study delved into the damage mechanisms of granite's physico-mechanical properties from both heating and cooling perspectives during various temperature phases. The insights garnered from this investigation offer novel value in comprehending the thermal damage characteristics induced by LN 2 cooling.

Effects of high temperature on the linear thermal expansion coefficient of Nanan granite

Experimental investigation on mechanical behaviors of Nanan granite after thermal treatment under conventional triaxial compression

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Mechanical Behaviors of Granite After Thermal Treatment Under Loading and Unloading Conditions

Effects of Thermal Treatment on the Macroscopic Physical Properties and Microstructure of Beishan Fine-Grained Granite

Laboratory Investigation on Physical and Mechanical Properties of Granite After Heating and Water-Cooling Treatment

Investigation on physico-mechanical properties and microstructural evolution patterns of heated granite after liquid nitrogen cooling

Effects of high temperature on rock bulk density

Investigation of the Mechanical and Permeability Evolution Effects of High-Temperature Granite Exposed to a Rapid Cooling Shock with Liquid Nitrogen

Permeability Evolution and Crack Characteristics in Granite under Treatment at High Temperature

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Experimental investigation on the physical-thermal properties of Nanan granite after air and water cooling for deep geothermal heat extraction

Experimental Investigation of the Damage Characteristics of High-Temperature Granite Subjected to Liquid Nitrogen Treatment

Thermal Effects on the Physical and Mechanical Properties and Fracture Initiation of Laizhou Granite During Hydraulic Fracturing

Physical-mechanical properties and thermal-induced damage of granite after high-temperature pretreatment

Effect of Thermal Damage on Tensile Strength and Microstructure of Granite: a Case Study of Beishan, China

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Effect of Temperature on Physical, Mechanical and Acoustic Emission Properties of Beishan Granite, Gansu Province, China

Experimental Investigation of Physical and Tensile Mechanical Properties of Granite after Different Heating and Cooling Treatments