Abstract:High temperature is an important factor affecting the mechanical properties and crack propagation behavior of granite. In this study, the mechanical properties and thermal damage mechanism of granite after high temperature are studied experimentally. Subsequently, based on the content and distribution of granite minerals, combined with computed tomography (CT) technique and grain-based model (GBM) modeling method, a novel discrete element numerical model considering real mineral distribution is introduced, and the rationality of the method is verified by experiments. On this basis, the mechanical behavior, crack propagation behavior and failure mode of granite after high temperature are studied. The results show that 450 °C is the thermal damage threshold of granite in this study. When T ≤ 450 °C, the development of thermally-induced microcracks is not significant, the P-wave velocity of granite decreases slightly, and the change of mechanical properties is not obvious. When T > 450 °C, the thermally-induced microcrack propagates rapidly, the fracture network and fracture zone are formed locally in the specimen, and the P-wave velocity and mechanical properties of granite deteriorate significantly. The simulation results show that the number of thermally-induced microcracks in granite specimens is positively correlated with temperature, and the tensile cracks are mainly at the mineral boundary, and the thermal stress concentration between mineral particles is the main cause of thermally-induced microcracks. After temperature treatment, there are mainly tensile cracks in granite specimens under uniaxial compression, and the orientation of tensile cracks tends to be isotropic with the increase of temperature. When T < 600 °C, the crack distribution and failure mode of granite specimens under uniaxial compression are consistent with those at room temperature. When T ≥ 600 °C, thermally-induced microcracks begin to dominate the uniaxial compression failure process, and granite specimens begin to show ductile failure characteristics, and the brittle-plastic transition was observed between 600 °C and 750 °C.

Permeability Evolution and Crack Characteristics in Granite under Treatment at High Temperature

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Effect of Thermal Treatment on the Fracture Toughness and Subcritical Crack Growth of Granite in Double-Torsion Test

Grain Size Heterogeneity Controls Strengthening to Weakening of Granite over High-Temperature Treatment

Permeability evolution of fractured granite after exposure to different high-temperature treatments

Porosity and wave velocity evolution of granite after high-temperature treatment: a review

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Effect of Thermal Damage on Tensile Strength and Microstructure of Granite: a Case Study of Beishan, China

Effects of Temperature and Confining Pressure on the Permeability of Beishan Granite from High-Level Radioactive Waste Disposal Repository

Structural Properties and Failure Characteristics of Granite after Thermal Treatment and Water Cooling

Investigation of the Mechanical and Permeability Evolution Effects of High-Temperature Granite Exposed to a Rapid Cooling Shock with Liquid Nitrogen

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Effects of Thermal Treatment on the Macroscopic Physical Properties and Microstructure of Beishan Fine-Grained Granite

Evolution of bulk compressibility and permeability of granite due to thermal cracking

The sensitivity of mechanical properties and pore structures of Beishan granite to large variation of temperature in nuclear waste storage sites

Fractal Characteristics and Energy Dissipation of Granite After High-Temperature Treatment Based on SHPB Experiment

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Permeability Evolution of Thermally Cracked Granite with Different Grain Sizes

Effect of High Temperature on Mode-I Fracture Toughness of Granite Subjected to Liquid Nitrogen Cooling

Tensile Properties and Damage Evolution Laws of Granite After High- and Low-Temperature Cycles