Abstract:Dual-comb spectroscopy typically requires the utilization of two independent and phase-locked femtosecond lasers, resulting in a complex and expensive system that hinders its industrial applications. Single-cavity dual-comb lasers are considered as one of the primary solution to simplify the system. However, controlling the crucial parameter of difference in repetition rates remains challenging. In this study, we present a dual-comb mode-locked Yb:CALGO laser based on a cavity-shared configuration with separated end mirrors. We employ two pairs of end mirrors and two thin-film polarizers angled at 45 degrees to the cavity axis, leading to separating the cross-polarized laser modes. We achieve simultaneous operation of two combs at approximately 1040 nm with pulse durations of around 400 fs and an average power exceeding 1 W. The repetition rates are approximately 59 MHz and their difference can be easily tuned from zero up to the MHz range. By effectively canceling out common mode noises, we observe minimal fluctuation in the repetition rate difference with a standard deviation of about 1.9 Hz over ten minutes, while experiencing fluctuations in repetition rates as large as 90 Hz. We demonstrate the capabilities of this system by utilizing the free-running dual-comb setup for asynchronous optical sampling on a saturable absorber and measuring etalon transmission spectrum. This system allows for simple and independent control of the repetition rates and their difference during operation, facilitating the selection of optimal repetition rate difference and implementation of phase-locking loops. This advancement paves the way for the development of simple yet high-performance dual-comb laser sources.

All-polarization-maintaining dual-comb fiber laser system comprised of two free-running mode-locked fiber lasers with a mechanical sharing scheme

Mechanical sharing dual-comb fiber laser based on an all-polarization-maintaining cavity configuration

All-polarization-maintaining dual-wavelength mode-locked fiber laser based on macro-bending loss tuning

Dual-Comb Operation in an All-Polarization-Maintaining Ultrafast Holmium-Doped Fiber Laser

Free-running Dual-Comb Fiber Laser Mode-Locked by Nonlinear Multimode Interference.

Polarization-multiplexed, single-cavity dual-comb fiber laser based on a birefringent crystal and a saturable absorber.

1.9m Tunable Dual-Comb From a Polarization-Maintaining Single-Cavity Bidirectional Fiber Laser

Detection of carbon monoxide using a polarization-multiplexed erbium dual-comb fiber laser

1.9–2.4 μm Tunable Dual-Comb From a Polarization-Maintaining Single-Cavity Bidirectional Fiber Laser

Dual-comb fiber laser for stable frequency distribution

Mode-locked fiber laser generating cylindrical vector beams based on an all-polarization-maintaining fiber structure

All Polarization-Maintain Fiber Mode-Locked Laser Based on Nonlinear Polarization Evolution

Free-running Dual-Comb System Based on Environment-Shared Fiber Lasers with Passively Thermal Management

Narrow-linewidth Single-Polarization Fiber Laser Using Non-Polarization Optics.

An All Polarization-Maintaining Fiber Laser Mode Locked by Nonlinear Amplifying Loop Mirror with Different Biases

Robust All Polarization-Maintaining Femtosecond Fiber Laser with Various Phase Bias

Tunable Multi-Wavelength All Polarization-Maintaining Hybrid Mode-Locked Yb-doped Fiber Laser

Unidirectional, dual-comb lasing under multiple pulse formation mechanisms in a passively mode-locked fiber ring laser

Dual-comb mode-locked Yb:CALGO laser based on cavity-shared configuration with separated end mirrors

Picometer-resolution dual-comb spectroscopy with a free-running fibre laser

Bidirectional Mode-Locked Fiber Laser Based on Nonlinear Multimode Interference