Abstract:We demonstrate a 2.08 μm all-polarization-maintaining (PM) holmium-doped fiber oscillator using a hybrid mode-locking technique with nonlinear polarization evolution (NPE) and a semiconductor saturable absorber mirror (SESAM). This oscillator features a linear structure with dual output ports. It initiates stable single-pulse mode-locking at a fundamental repetition rate of 57.86 MHz, requiring only about 400 mW of pump power. However, removing SESAM requires increasing the pump power to about 2.2 W—about a 5.8-fold increase—to initiate mode-locking, which starts in a multi-pulse state. Additionally, the oscillator can operate in two distinct states by adjusting the phase bias, ensuring that the main output port delivers high-quality, soliton-like femtosecond pulses. The other port, known as the rejection port, emits lower-quality pulses with different spectral and temporal characteristics. However, in one state, the pulse quality at the rejection port is significantly enhanced, approaching the high quality of the main output port. Theoretical analysis indicates that the pulse quality at the rejection port strongly relies on the energy distribution between the two orthogonally polarized pulses in the PM fiber. Another advantage of the hybrid mode-locking configuration is that it allows a pump power tuning range to maintain single-pulse operation as high as 220 mW. It is ∼4 times higher than that of the NPE-only configuration which is about 60 mW. These results indicate that oscillators using hybrid mode-locking exhibit much greater flexibility and reliability than those using PM-NPE alone. The hybrid mode-locking technique shows potential in addressing the self-starting challenges inherent in PM-NPE lasers, thereby advancing their applicability in practical scenarios.

Polarization maintaining harmonically mode-locked fiber laser with suppressed supermode noise due to continuous wave injection

Robust mode-locking in a hybrid ultrafast laser based on nonlinear multimodal interference

Passively Mode-Locked Femtosecond Fiber Laser Using a SESAM

Stable Nanosecond-Pulse Fiber Lasers Mode-Locked with Molybdenum Diselenide

Incorporating MoS2 saturable absorption with nonlinear polarization rotation for stabilized mode-locking fibre lasers

SESAM mode-locked all-polarization-maintaining fiber linear cavity ytterbium laser source with spectral filter as pulse shaper

An All Polarization-Maintaining Fiber Laser Mode Locked by Nonlinear Amplifying Loop Mirror with Different Biases

Er-doped mode-locked fiber lasers based on nonlinear polarization rotation and nonlinear multimode interference

Passive Harmonic Hybrid Mode-Locked Fiber Laser with Extremely Broad Spectrum.

Enhanced performance of all-PM Ho-doped fiber oscillator using NPE-SESAM hybrid mode-locking

All Polarization-Maintain Fiber Mode-Locked Laser Based on Nonlinear Polarization Evolution

Low-repetition-rate, all-polarization-maintaining Yb-doped fiber laser mode-locked by a semiconductor saturable absorber

Hybrid Mode-Locked 2μm Fiber Laser Based on Nonlinear Polarization Rotation and Semiconductor Saturable Absorber Mirror

All-polarization-maintaining NALM mode-locked Er/Yb-doped large-mode-area fiber oscillator

All-polarization-maintaining Passively Mode-Locked Ho-doped Fiber Laser Oscillator and Amplifier Based on a Nonlinear Optical Loop Mirror

High-Energy Laser Pulse with A Submegahertz Repetition Rate from A Passively Mode-Locked Fiber Laser

Polarized Dissipative Solitons In All-Polarization-Maintained Fiber Laser With Long-Term Stable Self-Started Mode-Locking

Nd-Doped Polarization Maintaining All-Fiber Laser With Dissipative Soliton Resonance Mode-Locking at 905 nm

Yb-doped mode-locked fiber laser with a hybrid structure of NPR and a Lyot filter as the saturable absorber

293 W, GHz narrow-linewidth, polarization maintaining nanosecond fiber amplifier with SBS suppression employing simultaneous phase and intensity modulation

570 MHz Harmonic Mode-Locking in an All Polarization-Maintaining Ho-doped Fiber Laser.