Abstract:We demonstrate a 2.08 μm all-polarization-maintaining (PM) holmium-doped fiber oscillator using a hybrid mode-locking technique with nonlinear polarization evolution (NPE) and a semiconductor saturable absorber mirror (SESAM). This oscillator features a linear structure with dual output ports. It initiates stable single-pulse mode-locking at a fundamental repetition rate of 57.86 MHz, requiring only about 400 mW of pump power. However, removing SESAM requires increasing the pump power to about 2.2 W—about a 5.8-fold increase—to initiate mode-locking, which starts in a multi-pulse state. Additionally, the oscillator can operate in two distinct states by adjusting the phase bias, ensuring that the main output port delivers high-quality, soliton-like femtosecond pulses. The other port, known as the rejection port, emits lower-quality pulses with different spectral and temporal characteristics. However, in one state, the pulse quality at the rejection port is significantly enhanced, approaching the high quality of the main output port. Theoretical analysis indicates that the pulse quality at the rejection port strongly relies on the energy distribution between the two orthogonally polarized pulses in the PM fiber. Another advantage of the hybrid mode-locking configuration is that it allows a pump power tuning range to maintain single-pulse operation as high as 220 mW. It is ∼4 times higher than that of the NPE-only configuration which is about 60 mW. These results indicate that oscillators using hybrid mode-locking exhibit much greater flexibility and reliability than those using PM-NPE alone. The hybrid mode-locking technique shows potential in addressing the self-starting challenges inherent in PM-NPE lasers, thereby advancing their applicability in practical scenarios.

Robust mode-locking in a hybrid ultrafast laser based on nonlinear multimodal interference

All-polarization-maintaining linear fiber laser mode-locked by nonlinear polarization evolution with phase bias

Er-doped mode-locked fiber lasers based on nonlinear polarization rotation and nonlinear multimode interference

Generation of Different Mode-Locked States in Nonlinear Multimodal Interference-Based Fiber Lasers

Mode-locked Er-doped Fiber Laser Based on Nonlinear Multimode Interference

All Polarization-Maintain Fiber Mode-Locked Laser Based on Nonlinear Polarization Evolution

Enhanced performance of all-PM Ho-doped fiber oscillator using NPE-SESAM hybrid mode-locking

Generation of different mode-locked states in a Yb-doped fiber laser based on nonlinear multimode interference

A Robust and Novel Linear Fiber Laser Mode-locked by Nonlinear Polarization Evolution in All-polarization-maintaining Fibers

An All Polarization-Maintaining Fiber Laser Mode Locked by Nonlinear Amplifying Loop Mirror with Different Biases

Linear Polarization-maintaining Fiber Laser Mode-locked by Nonlinear Polarization Evolution

976-nm pulse-type switchable all-fiber mode-locked laser based upon nonlinear multimode interference

Incorporating MoS2 saturable absorption with nonlinear polarization rotation for stabilized mode-locking fibre lasers

Robust 700 MHz Mode-Locked Yb:fiber Laser with a Biased Nonlinear Amplifying Loop Mirror.

Robust optical-frequency-comb based on the hybrid mode-locked Er:fiber femtosecond laser

98 fs High Energy Stable Hybrid Mode-Locked Nonlinear Polarization Rotation With CuO-Doped ZnO Saturable Absorber

Er-Doped Mode-Locked Fiber Laser with a Hybrid Structure of a Step-Index–Graded-Index Multimode Fiber As the Saturable Absorber

Ultrafast PM Fiber Ring Laser Mode-Locked by Nonlinear Polarization Evolution with Short NPE Section Segments

Demonstration of high-stable self-mode-locking pulses based on self-focusing in fiber lasers

115-Mhz Linear NPE Fiber Laser Using All Polarization-Maintaining Fibers

Mid-infrared ultrashort pulses generated from a hybrid mode-locked Er:ZBLAN fiber laser