Abstract:A novel mode-locking method based on nonlinear multimode interference (NLMI) using a distributed large-core (105 μm) graded-index multimode fiber (GIMF)-based saturable absorber (SA) capable of generating four pulse modes is proposed. The distributed SA geometry consists of two GIMFs located at different positions in the resonant cavity. The coupling and joint operation not only facilitate resistance to pulse fragmentation but also provide a sophisticated and widely tunable transmission with saturable and reverse saturable absorption phenomena. Based on this, dissipative soliton (DS), dissipative soliton resonance (DSR), wedge-shaped, and staircase pulses are achieved without additional filters. The DS has accessible output power, pulse energy, bandwidth, and duration of up to 15.33 mW, 2.02 nJ, 22.63 nm, and ~1.68 ps. The DSR has an achievable pulse duration and energy of ~32.39 ns, 30.3 nJ. The dispersion range that allows DS operation is studied, and the dynamics of the evolution from DS to DSR are observed. The versatility, flexibility, and simplicity of the SA device, combined with the possibility of scaling the pulse energy, make it highly attractive for ultrafast optics and nonlinear dynamics.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to develop a distributed large - core - diameter (105 µm) graded - index multimode fiber (GIMF) saturable absorber (SA) based on nonlinear multimode interference (NLMI) for generating fiber lasers in different mode - locked states. Specifically, the paper proposes a novel mode - locking method that utilizes two GIMFs located at different positions in the resonator to achieve the generation of four sub - pulse modes, including dissipative solitons (DS), dissipative soliton resonances (DSR), wedge - shaped pulses and step - like pulses. The generation of these mode - locked states does not require additional filters and has high output power, pulse energy, bandwidth and duration.
### Main problems:
1. **Improve pulse energy and mode diversity**: Existing mode - locked lasers can usually generate only two or fewer mode - locked states (N ≤ 2), and the pulse energy is usually at the sub - nanojoule level. This paper aims to achieve the generation of multiple mode - locked states through the distributed GIMF structure and improve the pulse energy.
2. **Overcome length limitations**: Traditional GIMF - SAs have strict length limitations, which limit their application range. In this paper, this problem is solved by introducing two GIMFs at different positions, achieving more complex transmission characteristics and a wider tuning range.
3. **Achieve high - energy, high - chirp pulses**: Through the distributed GIMF structure, this paper shows how to generate high - energy, high - chirp DS and DSR pulses, as well as wedge - shaped and step - like pulses in an all - fiber architecture.
### Specific objectives:
- **Generate multiple mode - locked states**: Through the distributed GIMF structure, achieve the generation of DS, DSR, wedge - shaped pulses and step - like pulses.
- **Improve pulse performance**: The maximum output power of DS pulses is 15.33 mW, the pulse energy is 2.02 nJ, the bandwidth is 22.63 nm, and the duration is ~1.68 ps; the duration of DSR pulses is ~32.39 ns, and the energy is 30.3 nJ.
- **Study the evolution from DS to DSR**: Observe and study the dynamic evolution process from DS to DSR and verify the theoretical prediction.
### Methods and results:
- **Experimental setup**: A fiber laser in a ring configuration is adopted, including erbium - doped fiber (EDF), dispersion - compensating fiber (DCF), polarization controller (PC) and polarization - insensitive isolator (PI - ISO). The distributed GIMF - SAs are located upstream of the PC and downstream of the PI - ISO.
- **Transmission characteristics**: The transmission characteristics are measured by injecting an integrated SA with a self - made nonlinear polarization rotation (NPR) ML 1.56 µm pulse laser. The results show that the transmission has obvious oscillation phenomena, including saturable absorption and reverse - saturable absorption.
- **Mode - locking performance**: By adjusting the pump power, PC and SA, the generation of DS, DSR, wedge - shaped pulses and step - like pulses is achieved. DS pulses have typical rectangular spectral characteristics, while DSR pulses present triangular spectral characteristics.
In conclusion, through the innovative distributed GIMF structure, this paper successfully achieves the generation of multiple mode - locked states and significantly improves the pulse performance, providing a new tool for ultrafast optics and nonlinear dynamics research.