Abstract:The effect of ultrasonic treatment on dispersion of carbon nanotubes (CNT), graphene nanoplates (GNP) and carbon black (CB) in polypropylene (PP) using twin screw extrusion (TSE) was investigated. The ultrasonic power consumption as a function of filler concentration was found to increase for PP/GNP, decrease for PP/CNT and slightly increase for PP/CB. The difference in behavior of the ultrasonic power consumption was related to the void (bubble) concentration in the polymer composites. The efficiency of the ultrasonic treatment was verified through measurements of rheological, electrical and mechanical properties as well as by morphological studies. Ranking of ultrasonic dispersion in composites from best to worse was PP/CB, PP/CNT and PP/GNP. Ranking of the rheological and electrical percolation threshold of composites from low to high was PP/CNT, PP/CB and PP/GNP. The storage modulus and complex viscosity of PP/CNT and PP/CB composites in the low frequency region increased with the ultrasonic treatment while little changes occurred in the PP/GNP composites. In the percolation region, the electrical resistivity of ultrasonically treated composites dropped by 8, 4 and 2 orders of magnitude for PP/CNT, PP/CB and PP/GNP, respectively, compared with the untreated ones. The Young's modulus, yield stress and elongation at break of the PP/CNT and PP/GNP composites were not affected by ultrasonic treatment, but the elongation at break of the treated PP/CB composite at a concentration of 10 wt% increased from 230% to 310%. Morphological studies showed that agglomerates size and agglomerates area ratio of PP/CNT and PP/CB composites reduced with ultrasonic treatment, but not for PP/GNP composites. The incorporation of various fillers increased the crystallization temperature, melt temperature and lamella thickness and decreased the spherulites size. The fillers acted as gamma form crystal nucleation agents with the ranking of nucleation ability of CNT > GNP > CB. (C) 2016 Elsevier Ltd. All rights reserved.

Dispersion characteristics of polypropylene/organo-modified single-walled carbon nanotube composites with a long-chain phosphonic acid added as the third dispersant component and their drawn orientation

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Effect of Drawn Orientation on Polypropylene/Organo-Modified Carbon Nanotube Composites Containing Polyrotaxane and Nanocellulose

Ultrasonic Twin Screw Compounding of Polypropylene with Carbon Nanotubes, Graphene Nanoplates and Carbon Black

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Effect of Carbon Nanotube on Thermal, Tribological and Mechanical Properties of 3D Printing Polyphenylene Sulfide

Composites Of Functional Poly(Phenylacetylene)S And Single-Walled Carbon Nanotubes: Preparation, Dispersion, And Near Infrared Photoresponsive Properties

Preparation of flexible, highly conductive polymer composite films based on double percolation structures and synergistic dispersion effect

Novel Comb-Like Copolymer Dispersant for Polypropylene/CaCO3 Composites and Its Influence on Dispersion, Crystallization, Mechanical, and Thermal Properties

Experimental Investigation of Polypropylene Composite Drawn Fibers with Talc, Wollastonite, Attapulgite and Single-Wall Carbon Nanotubes

The effects of carbon nanotubes selective location on the structures and properties of polyphenylene sulfide/polyamide 66 fibers

Surfactant Assisted Dispersion of Single-Walled Carbon Nanotubes in Polyvinylpyrrolidone Solutions

Comb-like copolymer dispersant for PP/CaCO<sub>3</sub> composites: effects of particle concentration on properties of composites

Biobased Poly(1,3-propylene 2,5-furandicarboxylate)-Carbon Nanotubes Nanocomposites with Enhanced Thermal, Mechanical Properties and Crystallization Behavior

Modification of Polypropylene with Composite Nucleating Agents Containing 2,2-Methylene-bis-(4, 6-di-t-butylphenylene) Phosphate/Attapulgite/Silica Nano-particles

Multi-walled carbon nanotube reinforcement in polypropylene nanocomposites: comprehensive analysis of thermal behavior, mechanical properties, and dispersion characteristics

Morphology And Properties Of Halloysite Nanotubes Reinforced Polypropylene Nanocomposites

The Injected Foaming Study of Polypropylene/Multiwall Carbon Nanotube Composite with In Situ Fibrillation Reinforcement

Dispersion of Nano-Carbon Filled Polyimide Composites Using Self-Degradated Low Molecular Poly(Amic Acid) As Impurity-Free Dispersant

Dispersion of multi-walled carbon nanotubes in poly(aryl ether ketone) obtained by in situ polymerization