Abstract:With the increasing proportion of close-distance coal seam mining in China, the problem of strong mining pressure during the mining of close-distance coal seams is becoming more and more severe. This article focuses on the complex stress environment and severe mining pressure encountered in the mining of thick coal seams under the multi-coal-seam goaf of Zhunnan Coal Mine. By using research methods, such as similar material simulation, theoretical analysis, and numerical simulation, it studies in depth the instability characteristics of the overlying rock structure of the W1701 working face, the inducing factors and mechanisms of strong mining pressure during the mining process, and control measures. The results show that the roof structure of the W1701 working face can be divided into "high-level key layer (hard rock)–giant thick soft and weak rock group–low-level key layer (hard rock)", and the law of mining pressure manifestation presents a small cycle formed by the instability of "masonry beam" structure and a main large cycle formed by the periodic penetration and step-down of the giant thick soft and weak rock group, with the load on the support during the large cycle up to 5.4 times the rated working resistance. In addition, this article proposes the strategy of using layered mining to control the manifestation of strong mining pressure under the "hard sandwiched soft" overlying rock condition of the Zhunnan Coal Mine, optimizes the thickness of the layered mining of the thick coal seam, and finally, determines the upper layer thickness of 2.8 m and the lower layer thickness of 4 m, inducing the giant thick soft and weak rock formation to undergo incremental damage and releasing the fracture energy incrementally, effectively controlling the manifestation threat of strong mining pressure in the mining of thick coal seams under the close-distance coal seam goaf. As the proportion of close-range coal seam mining increases in China, the problem of strong mining pressure during the mining of close-range coal seams becomes more severe. This article focuses on the complex stress environment and severe mining pressure in the mining of thick coal seams under multiple mined-out areas in the Zhunnan coal mine. Similar material simulation, theoretical analysis, and numerical simulation methods were used to conduct in-depth research on the unstable characteristics of the overlying rock structure of the W1701 working face, the causes and mechanisms of strong mining pressure during the mining process, and control measures. The results show that the roof structure of the W1701 working face can be divided into "high-level key layer (hard rock)–thick soft weak rock group–low-level key layer (hard rock)." The law of mining pressure manifestation presents small cycles of instability formed by "block beams" and main cycles of pressure formed by vertically cracked periodic penetration and step sinking of the thick soft weak rock group. Moreover, during the main cycle of pressure, the load-bearing capacity of the support is up to 5.4 times the rated working resistance. Furthermore, it is proposed to use hierarchical mining to control the manifestation of strong mining pressure in the "hard-inlaid soft" overlying rock condition of the Zhunnan coal mine and optimize the thickness of layered mining of thick coal seams. Ultimately, the upper layer thickness was determined as 2.8 m; the lower layer thickness was determined as 4 m, and the layered mining induced the thick soft weak rock group to undergo gradual damage and energy release, effectively controlling the threat of severe mining pressure during the mining of thick coal seams under the close-range coal seam mining.

Feasibility study on fully mechanized large mining height long wall top-coal caving mining in ultra-thick (20–30 m), parting-rich coal seams: A case study of the Laosangou mining field in China

Motion Mechanisms for Top Coal and Gangue Blocks in Longwall Top Coal Caving (LTCC) with an Extra-Thick Seam

Study on the Laws of Overlying Strata Movement of Repeated Mining of Close Distance Thick Coal Seam Under Large Surface Water

Dynamic sublevel caving technology for thick seams with large dip angle in longwall top coal caving (LTCC)

Reasonable stopping method and retracement channel support at fully mechanized top coal caving working face of 15 m extra‐thick coal seam: A case study

Analysis Of Overlying Strata Movement And Behaviors In Caving And Solid Backfilling Mixed Coal Mining

Comprehensive Study of Strata Movement Behavior in Mining a Longwall Top Coal Caving Panel of a Composite Coal Seam with Partings

Study on the Mechanism and Control of Strong Rock Pressure in Thick Coal Seam Mining under the Goaf of Very Close Multiple Coal Seams

Safety and high-recovery mechanisms and application research for initial mining of thick-coal-seam with complex structure and thick-hard roof

A Study of the Top-Coal-Drawing Law of Steeply Inclined and Extremely Thick Coal Seams in the Wudong Coal Mine

Evolution Characteristics of a High-Level Asymmetric Fracture-Seepage Community and Precise Coalbed Methane Drainage Technology during Mining of Outburst-Prone Coal Seam Groups

Simulation and On-Site Detection of the Failure Characteristics of Overlying Strata under the Mining Disturbance of Coal Seams with Thin Bedrock and Thick Alluvium

Boundary quantitative characterization of the top-coal limit equilibrium zone in fully mechanized top-coal caving stope along the strike direction of working face

Effect of Mining Thickness on Overburden Movement and Underground Pressure Characteristics for Extrathick Coal Seam by Sublevel Caving with High Bottom Cutting Height

Study on the Evolution Law of Fracture Field in Full-Mechanized Caving Mining of Double System and Extrathick Coal Seam

Study on the Partial Paste Backfill Mining Method in a Fully Mechanized Top-Coal Caving Face: Case Study from a Coal Mine, China

Study on the structural characteristics of the overburden under thick loose layer and thin-bed rock for safety of mining coal seam

Development Law of Water-Conducting Fracture Zones in Overburden above Fully Mechanized Top-Coal Caving Face: A Comprehensive Study

Research on the Mechanism and Control Technology of Coal Wall Sloughing in the Ultra-Large Mining Height Working Face

Non-repeated advance support technology: a fully mechanized caving face in extra thick coal seam of North China

Numerical modelling of loose top coal and roof mass movement for a re-mined seam using the top coal caving method