Abstract:The key to safe and efficient longwall mining of steeply dipping seams lies in the stability control of the “support-surrounding rock” system. This study analyzes the difficulties encountered when controlling the stability of the support during the longwall mining process of steeply dipping coal seams in terms of the characteristics of the nonuniform filled-in gob using a combination of physical tests, theoretical analyzes, and field measurements. Considering the floor as an elastic foundation, we built a “support-surrounding rock” mechanical model using data obtained on support-surrounding rock systems in different regions and the laws of support motion under different load conditions. Our findings are summarized as follows: first, depending on the angle of the coal seam, the caving gangue rolls (slide) downward along the inclined direction, resulting in the formation of a nonuniform filling zone in the deep gob where the lower, middle, and upper sections are filled, half-filled, and empty, respectively. In addition, an inverted triangular hollow surface is formed on the floor of the gob in the middle and upper sections behind the support. Furthermore, as the angle of the coal seam, length of the working face, and mining height increase, the characteristics of the nonuniform filled-in gob are enhanced. Second, we found that because of the gangue support, the “support-surrounding rock” system is relatively stable in the lower part of the working face; however, in the middle and upper sections of the working face, the contact method and loading characteristics of the support are more complicated, making stability control difficult. Third, the magnitude and direction of the load, action point, and mining height affect the stability of the support to varying degrees, with the tangential load and action position of the roof load having the most significant impacts on the stability of the support. Under loading by the roof, rotation and subsidence of the support inevitably occur, with gradually increasing amplitudes and effects on the intersupport and sliding forces. Finally, we found that overall stability can be achieved by adopting measures involving “sliding advancement of supports” and applying a “down-up” removal order. These research results serve as a significant reference and guidance for longwall mining applications.

Non-repeated advance support technology: a fully mechanized caving face in extra thick coal seam of North China

A Novel Non‐pillar Coal Mining Technology in Longwall Top Coal Caving: A Case Study

Backfilling Technology and Strata Behaviors in Fully Mechanized Coal Mining Working Face

Research on Low-Density Cross-Border Support Technology for Large-Section Coal Roadway in Shallow-Buried Thick Coal Seam

Optimization of face flexible bolting and grouting technology for longwall face support under difficult geological conditions

Study on Time-Dependent Failure Mechanisms and CBAG Differential Support Technology of Roadway in Steeply Inclined Coal Seam

Study on Anchor Cable instead of Single Hydraulic Prop Support in Advance Support of Deep Roadway

Differential roof cutting for roadway support in dual gob-side entry retention on a single working face − Multilevel continuous anchor-grouting control technology: A case study

Study on the Stability of Coal Pillars in a Gob-Side Two-Entry Arrangement of Different Layers in Fully Mechanized Caving and the Zonal Linkage Control of "Heteromorphic" Surrounding Rock

Coordinated Supporting Method of Gob-Side Entry Retaining in Coal Mines and a Case Study with Hard Roof

Overburden Breaking Law and Safe Mining Technology in Thin Bedrock Stope with Thick Alluvium

Research of Roof Anchorage Rock Beam Bearing Structure Model of Extra-Large Width Open-Off Cut and Its Engineering Application in a Coal Mine, China

Application of high pretension yieldable bolt-anchor support for gateway with new cross-section in a deep coal mine

Practices, experience, and lessons learned based on field observations of support failures in some Chinese coal mines

A Simulation Experimental Study on the Advance Support Mechanism of a Roadway Used with the Longwall Coal Mining Method

Stability Analysis of “Support-Surrounding Rock” System for Fully Mechanized Longwall Mining in Steeply Dipping Coal Seams

Research on the Mechanism and Control Technology of Coal Wall Sloughing in the Ultra-Large Mining Height Working Face

Control Mechanisms and Design for a 'Coal-Backfill-gangue' Support System for Coal Mine Gob-Side Entry Retaining

A Three-Dimensional Supporting Technology, Optimization and Inspiration from a Deep Coal Mine in China

Study on Advanced Anchor - grouting Support of Mining Roadway in Close Lower Coal Seam