Abstract:The continuous large deformation of the surrounding rock during gob-side entry driving in a 1000-m-deep mine requires frequent renovation of the mining roadway, seriously restricting the normal mining operations at the coal face. Taking 11,216 headgate of a coal mine as the engineering background, this paper expounds that the large deformation factors of the gob-side entry driving of a 1000-m-deep mine are stress-field factors dominated by high in-situ stress, side abutment pressure, front abutment pressure and tectonic stress, and stress-related factors dominated by coal body crushing, unreasonable support, large section size and broken narrow coal pillar. The two-stage pressurization of the surrounding rock of the section roadway of the mine is governed by the following fundamental law: After pressurization, the peak area of the original abutment pressure of the roadway transfers to the lower parts of the surrounding rock, resulting in an increased stress in the surrounding rock at the side of the roadway. A targeted cooperative control involving external anchor-internal unloading of the surrounding rock of the roadway during gob-side entry driving is proposed, and the pressure relief mechanism in the surrounding rock during the static and dynamic pressure stages of the hole-making process is elucidated: the hole-making space transfers the peak stress to the deep during the static pressure stage, and it transfers the high stress to the deep during the dynamic pressure stage. The pressure relief laws of the surrounding rock were analyzed for different hole-making parameters during the static and dynamic pressure stages of deep gob-side entry driving, the hole-making parameters of the 11,216 headgate were as follows: the hole-making depth, length, and spacing were 8, 4, and 3.2 m. A "four-in-one" double space monitoring method was developed to evaluate the control effect of the support structure on the surrounding rock. The results indicated that the surrounding rock deformation remained within a controllable range, the support structure did not experience any breakage or detachment throughout the service period, and the hole-making space played a pressure relief role. The successful application of this technology to control the large deformations in the surrounding rock of coal roadways in deep mines via gob-side entry driving is of great scientific significance.

Control mechanism and support technique about gateway driven along goaf in fully mechanized top coal caving face

A New Gob-Side Entry Retaining Approach with Reinforced Filling Gangue Wall in Thin Coal Seam

Failure mechanism of bolting support and high-strength bolt-grouting technology for deep and soft surrounding rock with high stress

Controlling large deformations in soft rock roadways with integrated anchor shotcrete and grouting techniques

Study on the Stability of Coal Pillars in a Gob-Side Two-Entry Arrangement of Different Layers in Fully Mechanized Caving and the Zonal Linkage Control of "Heteromorphic" Surrounding Rock

Failure Mechanism and Control Technology of Thick and Soft Coal Fully Mechanized Caving Roadway under Double Gobs in Close Coal Seams

Study on Advanced Anchor - grouting Support of Mining Roadway in Close Lower Coal Seam

Study on Stability Control Mechanism of Deep Soft Rock Roadway and Active Support Technology of Bolt-Grouting Flexible Bolt

Research on the Control Technology and Key Parameters of External Anchor-Internal Unloading of Surrounding Rock During Gob-Side Entry Driving Under Severe Mining of 1000-m-Deep Mine

Analysis of Surrounding Rock Control Technology and Its Application on a Dynamic Pressure Roadway in a Thick Coal Seam

Combined support technology for main roadway passing through goaf: A case study

Optimization of face flexible bolting and grouting technology for longwall face support under difficult geological conditions

Differential roof cutting for roadway support in dual gob-side entry retention on a single working face − Multilevel continuous anchor-grouting control technology: A case study

Research on Roadway Stability Control for Fully Mechanized Caving Face of Large Angle Inclined Mining

Full-Stress Anchoring Technology and Application of Bolts in the Coal Roadway

An innovative approach for gob‐side entry retaining in deep coal mines: A case study

Theory, technology and application of grouted bolting in soft rock roadways of deep coal mines

Support Control Design of Mining Roadway under Goaf of Close-Distance Coal Seam

Study on Zonal Cooperative Control Technology of Surrounding Rock of Super Large Section Soft Rock Chamber Group Connected by Deep Vertical Shaft

The Floor Heave Mechanism and Control Technology of Gob-Side Entry Retaining of Soft Rock Floor

Key Technique Study of Stability Control of Surrounding Rock in Deep Chamber with Large Cross-Section: A Case Study of the Zhangji Coal Mine in China