Abstract:A dynamic pressure swing adsorption simulation model has been developed that caters for a detailed transport mechanism of nitrogen and methane in the micropores of both ETS-4 and CMS adsorbents. Five adsorbents, namely, barium-exchanged ETS-4 dehydrated at 400 °C (Ba400), strontium-exchanged ETS-4 dehydrated at 190 °C (Sr190) and 270 °C (Sr270), Bergbau–Forchung carbon molecular sieve (BF CMS), and Takeda carbon molecular sieve (Takeda CMS), have been selected for the simulation study in order to compare their performances for upgrading natural gas. The transport mechanisms of gases in CMS and ETS-4 adsorbents are different. In pressure swing adsorption (PSA) simulation, the binary equilibrium and kinetics are represented by the models that have recently been experimentally verified for methane–nitrogen mixture in Ba400, Sr190, and Sr270 adsorbents [Majumdar, B.; Bhadra, S. J.; Marathe, R. P.; Farooq, S. Ind. Eng. Chem. Res. 2011, 50, 3021]. The multisite Langmuir isotherm is used for adsorption equilibrium. The kinetic model takes into account diffusion in both macropores and micropores and the concentration dependence of micropore diffusivity according to the chemical potential gradient as the driving force with constant limiting micropore diffusivity. It also has the provision to allow for the dual transport resistance and strong concentration dependence of the thermodynamically corrected micropore transport coefficients in CMS according to the published results [Huang, Q.; Farooq, S.; Karimi, I. A. Langmuir 2003, 19, 5722]. Operating conditions have been identified that favor high recovery while simultaneously meeting the required pipeline specification for methane purity. The performance of the best sample for methane–nitrogen separation by PSA found from the simulation study, Ba400, is compared with published performances of ETS-4 and clinoptilolite. It has been found that, in addition to meeting pipeline specification, Ba400 also gives higher recovery, thus making this adsorbent a promising candidate for further exploration.

Study on adsorption performance of different adsorbents in nitrogen/methane separation

Separation of Ethane/ethylene Gas Mixture by Ethane-Selective CAU-3-NDCA Adsorbent

Adsorption Equilibrium and Kinetics of Methane and Nitrogen on Carbon Molecular Sieve

Research Progress in Microporous Materials for Selective Adsorption and Separation of Methane from Low-Grade Gas

Separation of Methane–Nitrogen Mixture by Pressure Swing Adsorption for Natural Gas Upgrading

Methane separation and capture from nitrogen rich gases by selective adsorption in microporous Materials: A review

Adsorptive separation studies of ethane-methane and methane-nitrogen systems using mesoporous carbon.

A New Composite Sorbent for Methane-Nitrogen Separation by Adsorption

Highly Efficient Separation of Methane from Nitrogen on a Squarate‐based Metal‐organic Framework

Research progresses of adsorption separation of methane/nitrogen mixture on carbon molecular sieve

MIL-101-Cr/Fe/Fe-NH2 for Efficient Separation of CH4 and C3H8 from Simulated Natural Gas

Characterization of size-selective kinetic-based Ba-ETS-4 titanosilicate for nitrogen/methane separation: Chlorine-enhanced steric effects

Molecular simulations of the adsorption and separation of hydrogen sulfide, carbon dioxide, methane, and nitrogen and their binary mixtures (H2S/CH4), (CO2/CH4) on NUM-3a metal-organic frameworks

Separating nitrogen/methane on zeolite-like molecular sieves

Adsorption and Diffusion of Methane and Nitrogen in Barium Exchanged ETS-4

Screening Zeolites for Gas Separation Applications Involving Methane, Nitrogen, and Carbon Dioxide

Adsorption of Natural Gas in Metal-Organic Frameworks: Selectivity, Cyclability, and Comparison to Methane Adsorption

Modeling and simulation of the efficient separation of methane/nitrogen mixtures with [Ni3(HCOO)6] MOF by PSA

Water Resistant and Flexible MOF Materials for Highly Efficient Separation of Methane from Nitrogen

Separation of Carbon Isotopes in Methane with Nanoporous Materials