Abstract:The Heating Neutral Beam Injectors (HNBs) for ITER will have to deliver 16.7 MW beams of H/D particles at 1 MeV energy. The beams will be produced from H-/D- ions, generated by a radiofrequency plasma source coupled to an ion acceleration system. A prototype of the ITER HNB ion source is being tested in the SPIDER experiment, part of the ITER Neutral Beam Test Facility at Consorzio RFX. Reaching the design targets for beam current density and fraction of coextracted electrons is only possible by evaporating cesium in the source, in particular on the plasma facing grid (PG) of the acceleration system. In this way the work function of the surfaces decreases, significantly increasing the amount of surface reactions that convert neutrals and positive ions into H-/D-. It is then of paramount importance to monitor the density of negative ions and the density of Cs in the proximity of the PG. Monitoring the Cs spatial distribution along the PG is also essential to guarantee the uniformity of the beam current. In SPIDER, this is possible thanks to the Cavity Ringdown Spectroscopy (CRDS) and the Laser absorption Spectroscopy diagnostics (LAS), which provide line-integrated measurements of negative ion density and neutral, ground state Cs density, respectively. The paper discusses the CRDS and LAS measurements as a function of input power and of the magnetic and electric fields used to reduce the coextraction of electrons. Negative ion density data are in qualitative agreement with the analogous measurements in Cs-free conditions. In agreement with simulations, Cs density is peaked in the center of the source; a top/bottom non uniformity is also present. Several effects of plasma on Cs deposition and negative ion production are presented.

Caesium Balance of the ISIS H Penning Ion Source

Effects of impurity ions upon Cs recycling in a negative hydrogen ion source

Controlling the shape of the ISIS H− penning ion source beam pulse

2X scaled Penning source developments

The Modification at CSNS Ion Source

High current results from the 2X scaled Penning source

The Improvements at CSNS Ion Source

Summary of caesium evaporation and deposition during SPIDER first campaign

Research of Cesium Adsorption on Mo and Ni Based on Temperature-Controlled Quartz Microbalance

Enhancing Penning Ion Source Performance Through Geometry Optimization

Cs evaporation in a negative ion source and Cs cleaning tests by plasma sputtering

Recent H- diagnostics, plasma simulations, and 2X scaled Penning ion source developments at the Rutherford Appleton Laboratory

Characterization of cesium and H-/D- density in the negative ion source SPIDER

An H Surface Plasma Source for the ESS Storage Ring

An H - surface plasma source for the ESS storage ring

A global model of 2.45 GHz ECR ion sources for high intensity H+, H2+ and H3+ beams

Investigation of Surface Ionization Detector for Cesium Oven Evaporation Rate

A penning type ion source with high efficiency and some applications

Beam Formation Studies on the CERN IS03b H Source

An ion species model for positive ion sources - part I description of the model

Characterization of plasmas in negative ion sources using a Cs-H Collisional Radiative model