Abstract:SPIDER, an RF-driven negative ion source in the Neutral Beam Test Facility (NBTF), serves as the prototype for ITER's neutral beam injector (NBI). It is composed of 8 drivers powered by 4 RF generators, aiming to accelerate 50 A of negative hydrogen ions to 100 KeV with a beam uniformity target of 10%. The experiment, launched in 2018, tested negative ion production using caesium. Results match those of similar facilities, but SPIDER faces challenges due to its size, multiple drivers, and non-uniform plasma expansion. These issues impact beam uniformity, preventing the machine from reaching expected performance. To address this, SPIDER initiated a significant shutdown at the end of 2021 for improvements. One the most important aspects studied during the first experimental campaign is source uniformity, addressed both in terms of plasma and of caesium distribution. The latter is particularly relevant since its quality is directly related to the beam uniformity and divergence. To have more insight about these issues, monitoring the plasma properties in the extraction region is crucial, hence in the present contribution, the design and development of two new diagnostic systems are described: a movable Langmuir probe and a Retarding Field Energy Analyser (RFEA). The first can provide a vertical scan of the main plasma parameters close to the plasma grid. The spatial resolution would improve with respect to the already installed set of fixed Langmuir probes embedded in the grid system, and the newly installed diagnostic could interact with other sensors to produce complementary measurements (namely, electron photo-detachment). The latter, instead, allows the monitoring of the positive ion energy distribution: positive ions, in fact, can be precursors of the negative ones produced at the caesiated surface, but also influence the energy of negative ion and their extraction probability and thus collecting information about their energy distribution allows inferring details about the extracted negative ion beam. The two diagnostics are designed focusing on the experimental constraint of integrating the diagnostics in a harsh and complex environment such as SPIDER plasma: a preliminary study of the placement inside the source is carried out, then the electrode of the movable probe and the RFEA sensor are sized according to the spatial and energy resolution requested by the system.

Characterization of plasmas in negative ion sources using a Cs-H Collisional Radiative model

Characterization of Cs-free negative ion production in the ion source SPIDER by Cavity Ring-Down Spectroscopy

Characterization of cesium and H-/D- density in the negative ion source SPIDER

First operations with caesium of the negative ion source SPIDER

Negative ion density in the ion source SPIDER in Cs free conditions

Development and first operation of a Cavity Ring Down Spectroscopy diagnostic in the negative ion source SPIDER

Design and preliminary operation of a laser absorption diagnostic for the SPIDER RF source

Study and development of diagnostic systems to characterise the extraction region in SPIDER

2D electromagnetic simulations of RF heating via inductive coupling in the SPIDER device

Correlation of source parameters and beam properties in the early operation of the full size ITER negative ion beam source

Measure of negative ion density in a large negative ion source using Langmuir probes

Laser absorption spectroscopy studies to characterize Cs oven performances for the negative ion source SPIDER

Beam Formation Studies on the CERN IS03b H Source

First results from beam emission spectroscopy in SPIDER negative ion source

Numerical and experimental investigations of a microwave interferometer for the negative ion source SPIDER

Continuous pulse advances in the negative ion source NIO1

Cs evaporation in a negative ion source and Cs cleaning tests by plasma sputtering

Research Activities of RF-based Negative Ion Source in the ASIPP

Summary of caesium evaporation and deposition during SPIDER first campaign

First Beam Characterization by Means of Emission Spectroscopy in the NIO1 Experiment

Research and development progress of radio frequency ion source for neutral beam injector at ASIPP