Abstract:PurposeDuring the forming process, aluminum alloy sheets develop various types of textures and are subjected to cyclic loading as structural components, resulting in fatigue damage. This study aims to develop polycrystalline models with different orientation distributions and incorporate suitable fatigue indicator parameters to investigate the effect of orientation distribution on the mechanical properties of Al-7.02Mg-1.78Zn alloys under cyclic loading.Design/methodology/approachIn this study, a two-dimensional polycrystalline model with 150 equiaxed grains was constructed based on optical microscope images. Subsequently, six different orientation distributions were assigned to this model. The fatigue indicator parameter of strain energy dissipation is utilized to analyze the stress response and fatigue crack driving force in polycrystalline models with different orientation distributions subjected to cyclic loading.FindingsThe study found that orientation distribution significantly influences fatigue crack initiation. Orientation distributions with a larger average Schmid factor exhibit reduced stress response and lower fatigue indicator parameters. Locations with a larger average Schmid factor experience greater plastic deformation and present a higher risk for fatigue crack initiation. RVE with a single orientation undergoes more rotation to reach cyclic steady state under cyclic loading due to the ease of deformation transfer.Originality/valueCurrently, there are no reports in the literature on the calculation of fatigue crack initiation for Al-Mg-Zn alloys using the crystal plasticity finite element method. This study presents a novel strategy for simulating the response of Al-7.02Mg-1.78Zn materials with different orientation distributions under symmetric strain cyclic loading, providing valuable references for future research.

The anisotropic fatigue properties of extruded Al–Zn–Mg–Cu alloy

Effect of Grain Orientation Distribution on the Mechanical Properties of Al-7.02Mg-1.78Zn Alloys

A Crystallographic Model for the Orientation Dependence of Low Cyclic Fatigue Property of a Nickel-Base Single Crystal Superalloy

Relationship Between the Fatigue Behavior and Grain Structures of an As-Extruded Mg-6.2%Zn-0.6%Zr (in Wt.%) Alloy

Fatigue Crack Propagation Behavior of Al-Cu-Mg-Zr Alloy

Anisotropic Low Cycle Behavior of the Extruded 7075 Al Alloy

Creep-fatigue Behavior of Nickel-Based Single Crystal Superalloy with Different Orientations: Experimental Characterization and Multi-Scale Simulation

Anisotropic High Cycle Fatigue Property of Sc and Zr-modified Al-Mg Alloy Fabricated by Laser Powder Bed Fusion

Study on Fatigue Crack Propagation and Extrinsic Toughening of an Al–Li Alloy

Fatigue crack propagation within Al-Cu-Mg single crystals based on crystal plasticity and XFEM combined with cohesive zone model

On high‐cycle fatigue anisotropy of an aluminum alloy super‐thick plate

Influences of Grain Orientation on High-Cycle Fatigue Performance of Laser Powder Bed Fused Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Alloy at Room Temperature and 500 °C

Fatigue Crack Propagation Behavior of 2050 Aluminum Alloy

Effects of orientation on the fatigue crack growth behaviors of the ZK60 magnesium alloy in air and PBS

Enlarged Zn Content Improves Fatigue Crack Propagation Resistance of Two Al-Zn-Mg-Cu Alloys with Multiple Aging Tempers

Strength and Fatigue Fracture Behavior of Al–Zn–Mg–Cu–Zr(–Sn) Alloys

Acoustic Emission Study of Fatigue Crack Propagation in Extruded AZ31 Magnesium Alloy

Fracture Toughness and Fatigue Behavior of T7451 Al-Zn-Mg-Cu Alloy Thick Plate

Grain Refinement Enhanced Tensile Strength, Fracture Toughness and Fatigue Crack Propagation Resistance of a High Zn-Containing Al-Zn-Mg-Cu Alloy

Fatigue crack propagation anisotropy of an Al–Zn–Mg–Cu super-thick plate

Anisotropy in fatigue crack propagation behavior of Al-Cu-Li alloy thick plate