Measuring strain distributions in an asphalt pavement using fibre optic sensors under static loading by test vehicles
Dominik Hauswirth Danai Tsirantonaki Frank Fischli Carlo Rabaiotti Alexander M. Puzrin a Institute for Geotechnical Engineering,ETH,Zurich,Switzerlandb Institut für Bau und Umwelt,OST Eastern Switzerland University of Applied Sciences,Rapperswil,Switzerland
DOI: https://doi.org/10.1080/14680629.2024.2398480
2024-09-14
Road Materials and Pavement Design
Abstract:Understanding the in-situ structural behaviour of pavements plays an important role in road engineering. Hence, various measurement methods were developed in the past to get an insight into the response of roads to traffic loading. In the present study, distributed fibre optic strain sensors were embedded into a hot mix asphalt pavement. The sensors were used for strain measurements with high spatial resolution in order to assess its feasibility to gain the continuous strain distribution in the pavement under short-term static loading. In addition, the loading process was measured with high temporal resolution, indicating that – using shorter sensor lengths – vehicle passages could also be studied. The strain distributions gathered with this type of sensor were compared to the results of a simple finite element model and the effect of applying various sensor cables. In addition, new opportunities provided by distributed fibre optic sensors in road engineering are discussed.
construction & building technology,materials science, multidisciplinary,engineering, civil