Abstract:Most of the high-strength Mg alloys exhibit poor ductility at room temperature. Architecturing appropriate heterostructure in metallic materials gives rise to the breakthrough of the inherent strength-ductility trade-off dilemma. Here, we prepared a novel multiscale hetero-structure in Mg-9Al-1 Zn (AZ91) alloy, consisting of bimodal-structured center-region and fine-grained surface-layer, providing high strength and high ductility, i.e. yield strength of ∼303 MPa, tensile strength of ∼400 MPa, and elongation of ∼14.5 %. The multiscale microstructural heterogeneities were induced via a simple rolling process that combines the advantages of both accumulative rolling bonding (ARB) and hard plate rolling (HPR). By utilizing quasi-in-situ electron backscattered diffraction (EBSD)-digital image correlation (DIC) characterizations combined with the determination of dislocation/disclination distributions, it has been found that diversified strain accommodation mechanisms are stimulated by the strain incompatibilities near hetero-interfaces in the multiscale hetero-structure. In particular, non-basal slips have been activated largely in both the bimodal-structured center-region and fine-grained surface-layer. Moreover, a unique slip trace distribution has been observed in the fine grains adjacent to the basal-oriented coarse grain. Such a strain accommodation can better coordinate local strain incompatibility among the hetero-interface. The uniaxial loading–unloading–reloading tensile loop tests demonstrate that the multiscale heterogeneities impart a pronounced hetero-deformation induced hardening during tensile deformation. Multiple deformation modes, including the non-Schmid and non-basal slips, have been activated substantially in the multiscale hetero-structured Mg alloy, effectively relaxing local stress concentration and achieving stable plastic flow at a high-stress state, which is beneficial to improving strain-hardening ability and strength-ductility synergy. Our work could shed light on designing and processing strong and ductile Mg alloys, by tailoring proper microstructural heterogeneity to activate cooperated accommodating deformation modes.

Toward the development of Mg alloys with simultaneously improved strength and ductility by refining grain size via the deformation process

Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility

Grain size effect on tensile properties and slip systems of pure magnesium

Grain refinement and improved mechanical properties of Mg-4Zn-0.5Ca-0.5RE magnesium alloy by thermomechanical processing

Ultrafine-grained Mg alloy: Preparation, properties, design strategy

The mechanisms of grain growth of Mg alloys: A review

Unveiling the microstructure evolution and deformation mechanisms of micro-alloying Mg-1.5Zn-0.5Zr-0.5Sr alloy via extrusion-shearing

Research Progress of Microstructure Characteristics and Mechanical Properties of Hot-Deformed Biodegradable Mg-based Alloys

The Effects of Grain Refinement and Rare Earth Intermetallics on Mechanical Properties of As-Cast and Wrought Magnesium Alloys

Tailoring bimodal grain structure of Mg-9Al-1Zn alloy for strength-ductility synergy: Co-regulating effect from coarse Al2Y and submicron Mg17Al12 particles

Current research progress in grain refinement of cast magnesium alloys: A review article

Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation

The effect of grain size on deformation modes and deformation heterogeneity in a rolled Mg-Zn-Ca alloy

Toward strength-ductility synergy in Al–Mg alloys: augmenting solute Mg concentration and strain-hardening ability via melt spinning and hot extrusion

Strengthening-toughening methods and mechanisms of Mg–Li alloy: a review

Realizing ultra-fine grains and ultra-high strength in conventionally extruded Mg-Ca-Al-Zn-Mn alloys: The multiple roles of nano-precipitations

Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy

Deformation mechanisms in a novel multiscale hetero-structured Mg alloy with high strength-ductility synergy

Enhanced superplasticity achieved by disclination-dislocation reactions in a fine-grained low-alloyed magnesium system

Tailoring the heterophase interfacial structures to improve both strength and ductility of Al-Li alloys by fine tuning major solute Mg

Optimizing mechanical properties of magnesium alloys by philosophy of thermo-kinetic synergy: Review and outlook