Abstract:The Mg-Zn-Y-Nd alloy is a new type of degradable material for biomedical application. In the present study, Mg-6Zn-1.2Y-0.8Nd alloy was fabricated, and then extrusion and heat treatment were conducted to optimize its mechanical properties and cytocompatibility. The microstructure observation, mechanical property, degradation behavior and cytocompatibility tests were conducted on the Mg-Zn-Y-Nd alloy with three different states: as-cast (alloy C), as-extruded (alloy E) and extruded + heat treated (alloy EH). The results show that alloy C consists of coarse grains and continuous secondary phases. The extrusion process has caused incomplete recrystallization, and results in a mixed grain structure of elongated grains and small equiaxed grains (alloy E). The heat treatment process has promoted the recrystallization and homogenized the grain structure (alloy EH). Both the strength and ductility of the alloy has been improved by extrusion, but the following heat treatment has decreased the strength and increased the ductility. The degradation behavior of the alloy C and E alloys does not show much difference, but improves slightly in alloy EH, because the heat treatment has homogenized the microstructure and released the residual stress in the alloy. The directly and indirectly cell viability tests indicate that alloy EH exhibits the best cytocompatibility, which should be ascribed to its relative uniform degradation and low ion releasing rate. In summary, the combination of hot extrusion and heat treatment could optimize the mechanical property and cytocompatibility of the Mg-Zn-Y-Nd alloy together, which is beneficial for the future application of the alloy.

Research Progress of Microstructure Characteristics and Mechanical Properties of Hot-Deformed Biodegradable Mg-based Alloys

Microstructure evolution and mechanical responses of Al–Zn–Mg–Cu alloys during hot deformation process

Effect of original grain size on microstructure and properties of extruded Mg-2Zn-0.2Mn biomedical alloy

Research Progress in Degradation Behavior of Biodegradable Medical Mg-based Alloys in Vivo and in Vitro

The Effect of Heat Treatment and Extrusion on Microstructure and Properties of Medical Mg-1Mn-2Zn Alloy

Research Progress on Microstructure and Mechanical Properties of Medical Rare-Earth Magnesium Alloys

Effects of rolling processing on the microstructures, mechanical properties and strain softening behavior of biodegradable Zn-0.06 Mg alloy

Microstructure and properties of biomedical Mg-Zn-Ca alloy at different extrusion temperatures

Research Progress on Corrosion Behaviors and Improvement Methods of Medical Degradable Mg−Based Alloys

Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation

Research Progress on Microstructure Evolution and Strengthening-Toughening Mechanism of Mg Alloys by Extrusion

Microstructure, Mechanical Properties, Degradation Behavior, and Implant Testing of Hot-Rolled Biodegradable ZKX500 Magnesium Alloy

Microstructural Characteristics and Mechanical Properties of the Hot Extruded Mg-Zn-Y-Nd Alloys

Microstructure, Hot Deformation Behavior, and Recrystallization Behavior of Zn-1Fe-1Mg Alloy under Isothermal Compression

Research Progress on Corrosion Fatigue Behavior of Biomedical Degradable Magnesium-Based Alloys

Optimizing Mechanical Property and Cytocompatibility of the Biodegradable Mg-Zn-Y-Nd Alloy by Hot Extrusion and Heat Treatment

Effect of Hot Extrusion on Microstructure, Texture, and Mechanical Properties of Mg-Zn-Mn-0.5Ca Alloy

In vitro and in vivo studies on ultrafine-grained biodegradable pure Mg, Mg-Ca alloy and Mg-Sr alloy processed by high-pressure torsion.

Microstructure and Mechanical Properties of Hot-Extruded Mg-Zn-Ga-(Y) Biodegradable Alloys

Optimization of Microstructure and Mechanical Property of a Mg-Zn-Y-Nd Alloy by Extrusion Process

Systems, Properties, Surface Modification and Applications of Biodegradable Magnesium-Based Alloys: A Review