Abstract:Abstract Heat pipes are passive heat transfer systems and serve as an effective thermal management solution for electronic devices. The adaptability of heat pipes makes these suited for a wide application range, especially in the field of electronic thermal management. The current study highlights the transient numerical analysis of wickless heat pipes (thermosyphons) for the thermal management of electronic devices. The thermal performance of the thermosyphon is analyzed using both copper oxide (CuO) and aluminum oxide (Al2O3) nanofluids with their concentrations at 1% and 5%. Deionized (DI) water is employed as a reference case for comparison. The study is carried out for variable heat inputs to the thermosyphon ranging 10–50 W for a time interval of 30 s. The idea is to analyze the effect of the evaporator heat input and the nanoparticles concentration on the temperature, heat transfer coefficient, thermal resistance, and effective thermal conductivity of the heat pipe. The results indicate that CuO nanoparticles at a 5% concentration lead to a maximum thermal resistance reduction of 4.31% at 50 W, while alumina nanoparticles at the same concentration lead to a more substantial reduction of 6.66% at the same heat load. The evaporator temperature varies between 377.52 K to 374.99 K using deionized water, and 376.95 K to 374.29 K using CuO nanofluid (at 1% concentration). The heat pipe's evaporator attains its highest convective heat transfer coefficient (437.91 W/m2K) by using alumina nanofluid with 1% nanoparticle concentration at 50 W. Moreover, the effective thermal conductivity of the heat pipe is enhanced by 5% and 7% for copper oxide and aluminum oxide nanofluids (with 5% concentration), respectively, at 50 W. Thus, the nanofluids play a significant role in improving the efficiency and reliability of electronic components. These findings demonstrate the potential of using the nanofluids in thermosyphons to enhance their thermal performance in electronic cooling applications.

Theoretical Model to Investigate the Heat Transfer Mechanism through a Heat Pipe with Graphene Oxide/Distilled Water as Working Fluid

Ultra-efficient Heat Pipes Enabled by Nickel-Graphene Nanocomposite Coatings: Concept and Fundamentals

Experimental and theoretical investigation of the influence of heat transfer rate on the thermal performance of a multi-channel flat heat pipe

A light-weight and high thermal performance graphene heat pipe

A Lightweight and High Thermal Performance Graphene Heat Pipe

Remarkable Thermal Performance Enhancement of Micro Heat Pipes with Graphene-Nanoplatelet Nano-Wicks

A two-phase three-field modeling framework for heat pipe application in nuclear reactors

Three-Dimensional Numerical Study on the Flow and Heat Transfer in Wick of Loop Heat Pipe

3D Heat Transfer Analysis in a Loop Heat Pipe Evaporator with a Fully Saturated Wick

Investigation of Interface Profiles in Meshed Wicks and Related Evaporation Characteristics

Numerical investigation on transient and steady phase change heat transfer in the evaporator of a loop heat pipe

Thermal Performance Enhancement and Optimization of Two-Phase Closed Thermosyphon with Graphene-Nanoplatelets Coatings

Effect of the Heat Pipe Adiabatic Region

Numerical Investigation on Thermal Performance of Nanofluid-Assisted Wickless Heat Pipes for Electronic Thermal Management

Modeling and Analysis of Two-Phase Distribution in Large-Scale Separate Heat Pipe

Numerical investigation into the gas-liquid two-phase flow regime and heat transfer characteristics in a gravity heat pipe

Experimental Investigation of Nano-Particle Deposited Wick Structure's Heat Transfer Characteristics

Heat Transfer in Loop Heat Pipe’s Wick: Effect of Porous Structure Parameters

Thermal Dynamics of Heat Pipes with Sub-Critical Nanopores

Ultrafast Water Permeation in Graphene Nanostructures Anomalously Enhances Two‐Phase Heat Transfer

Experimental investigation of the effects of graphene nano particle added water fluid on heat transfer in a smooth tube with double inserts