Abstract:Wastewater discharges from industrial processes typically include elevated concentrations of contaminants, which largely consist of potentially harmful chemicals such as heavy metals. These contaminants are characterized by their slow rate of decomposition. Hence, the removal of these metallic ions from effluents poses a challenge. Among different treatments, the adsorption approach has considerable potential due to its ability to effectively eliminate both soluble and insoluble pollutants from effluent, even at lower levels of concentration. Of various wastes, fly ash (FA) material has been the subject of attention because it is abundant, has favorable qualities, and contains a high percentage of minerals. This review investigates multiple facets, with a specific focus on the application of FA, an industrial byproduct, as an adsorbent in removing heavy metals. A comprehensive examination was conducted on a range of concerns pertaining to the pollution caused by metallic ions, including the underlying causes, levels of contamination, health implications of heavy metals, and removal methods. Multiple factors were found to affect the adsorption process. Of all the factors, the pH value considerably influences the elimination of heavy metals. An acidic pH range of 2.5–4.5 was found to be optimal for achieving the highest possible elimination of As(V), Cu(II), Hg(II), and Cr(VI). The latter elimination rate reached 89% at the optimal pH level. Most heavy metals’ adsorption isotherms conformed to the Langmuir or Freundlich models, while the pseudo-second-order kinetics provided a satisfactory match for their removal. Using a raw FA, adsorption capacities were achieved in the removal of metallic ions, Ni(II), Pb(II), and Cr(VI), that ranged from 14.0 to 23.9 mg g−1. Meanwhile, the FA-zeolite showed a remarkable capacity to adsorb ions Mn(II), Ni(II), Cd(II), Cu(II), and Pb(II), with values ranging from about 31 to 66 mg g−1. The cost analysis showed that the treatment of FA is economically advantageous and may result in significant cost reductions in comparison to commercial adsorbents. In summary, FA is an inexpensive waste material with potential for water treatment applications and several other purposes due to its excellent chemical and mineralogical composition.

Optimization of copper removal from wastewater by fly ash using central composite design of Response surface methodology

Optimization of copper adsorption by chemically modified fly ash using response surface methodology modeling

Copper Ion Removal by Adsorption Using Fly Ash-Based Geopolymers: Process Optimization Insights from Taguchi and ANOVA Statistical Methods

Fly Ash Coated with Magnetic Materials: Improved Adsorbent for Cu (II) Removal from Wastewater

Adsorption of Metal Ions in Wastewater on Fly Ash

A low-cost sorbent for removal of copper ions from wastewaters based on sawdust/fly ash mixture

Investigation of Fly Ash for Sorption of Copper Ions in Multiple Contaminant System: an Implication on Re-Use of Waste Material under Concept of Sponge City

Removal of Toxic Copper Ion from Aqueous Media by Adsorption on Fly Ash-Derived Zeolites: Kinetic and Equilibrium Studies

Optimization of copper adsorption from synthetic wastewater by oil palm-based adsorbent using Central Composite Design

A study on removal characteristics of heavy metals from aqueous solution by fly ash

Treatment of Fly-Ash-Contaminated Wastewater Loaded with Heavy Metals by Using Fly-Ash-Synthesized Iron Oxide Nanoparticles

Possibility of Removing Cadmium Pollution from the Environment Using a Newly Synthesized Material Coal Fly Ash

Economical Wastewater Treatment for Removal of Copper (II) Ions From Wastewater

Co-disposal of Heavy Metals Containing Waste Water and Medical Waste Incinerator Fly Ash by Hydrothermal Process with Addition of Sodium Carbonate: A Case Study on Cu(II) Removal

Utilization Of Fly Ash In Heavy Metal Removal From Acid Mine Drainage

Adsorption of Copper Ions by Fly Ash Modified Through Microwave-Assisted Hydrothermal Process

Synthesis of porous materials by the modification of coal fly ash and its environmentally friendly use for the removal of heavy metals from wastewater

An effective way to utilize solid waste resources: The application of modified fly ash in removing Cu 2+ and Pb 2+ in wastewater

Wastewater Treatment Utilizing Industrial Waste Fly Ash as a Low-Cost Adsorbent for Heavy Metal Removal: Literature Review

Treatment of Comprehensive Wastewater from Chemical and Pharmaceutical Parks by Fly Ash-Coated Iron Electrode Electrocoagulation

Removal of Copper from Industrial Wastewater by Ion Flotation with Sodium Dodecyl Sulfate as Anionic Collector