An effective way to utilize solid waste resources: The application of modified fly ash in removing Cu 2+ and Pb 2+ in wastewater

Zhenzhou Yin,Gang Wang,Lu Wang,Pengyu Ren,Jian Sun,Hanghang Zhao,Puhui Ji
DOI: https://doi.org/10.1016/j.seppur.2024.127948
IF: 8.6
2024-05-17
Separation and Purification Technology
Abstract:The sustainable development of society requires the support of developed industrial production, which inevitably produces a series of industrial by-products, including heavy metal-containing wastewater and solid waste. Using solid waste to adsorb heavy metal ions in wastewater is a sustainable way. This not only reduces the environmental threat caused by solid waste accumulation, but also reduces the treatment cost of heavy metal ions in wastewater. In this study, fly ash was modified to prepare magnetic adsorbent (M-AT), which was used to adsorb Cu 2+ and Pb 2+ in wastewater. The results showed that M-AT has a good adsorption effect on Cu 2+ and Pb 2+ in wastewater. Its maximum adsorption capacity for Cu 2+ and Pb 2+ was 53.18 and 85.86 mg/g, respectively. Ion exchange and complexation reaction were major adsorption mechanisms of M-AT for Cu 2+ and Pb 2+ , they played an important role in the adsorption process. M-AT maintained a good adsorption effect on Cu 2+ and Pb 2+ under different influence factors. This ensured that M-AT can be used in complex application environments. In addition, M-AT exhibited good reusability, its removal rate for Cu 2+ and Pb 2+ reached 50.21 % and 75.15 % after 5 adsorption–desorption cycles. And the removal rate of M-AT for Cu 2+ and Pb 2+ in domestic sewage treatment plant influent, tailings drainage, industrial wastewater was 82.80 %, 87.12 %, 85.12 % and 95.10 %, 91.20 %, 93.13 %, respectively. These results proved the feasibility of M-AT in treating Cu 2+ and Pb 2+ in wastewater. This study provides a new way for the resource utilization of fly ash. Applying solid waste to treat heavy metal-containing wastewater is a sustainable way to treat industrial waste.
engineering, chemical
What problem does this paper attempt to address?