Abstract:Municipal solid waste circulating fluidized bed incineration (MSWCFBI) fly ash was a hazardous waste, maintaining challenges for disposal. One effective approach was stabilizing the toxic heavy metal ions in the fly ash structures in situ. This work proposed a fusion–hydrothermal method, including fusion pretreatment in nitrogen atmosphere and microwave-assisted hydrothermal process, to treat three MSWCFBI fly ash samples. Specifically, leaching tests were performed to demonstrate the heavy metal stabilization. Through the treatment of the fusion–hydrothermal process, the concentrations of Cd, Cu, Zn, Pb, Ni, and Cr ions leaching from the fly ashes were obviously less than those of the raw fly ash and the sample only treated by hydrothermal process. Meanwhile, the heavy metal ions migrating from the fly ash to the hydrothermal residual liquid were reduced. Importantly, lots of zeolites formed during the fusion–hydrothermal process, such as to bermorite and sodalite. The fusion pretreatment significantly facilitated the conversion of quartz into amorphous silicon and silicate salts. Then, the silicon dissolution was accelerated and zeolite formation was promoted. Eventually, the heavy metal ions could be trapped in zeolite frameworks, enhancing the stabilization of heavy metal. Moreover, the cation-exchange capability values of the three treated fly ash were 1.099, 1.168, and 1.188 meq g−1, two-folder larger than those of the samples only treated by hydrothermal process. In summary, the fusion–hydrothermal method could facilitate the stabilization of heavy metal ions in the fly ash and the as-obtained solid product with high content of zeolite was promising for future applications.

Co-disposal of Heavy Metals Containing Waste Water and Medical Waste Incinerator Fly Ash by Hydrothermal Process with Addition of Sodium Carbonate: A Case Study on Cu(II) Removal

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

[Effect of Sodium Carbonate Assisted Hydrothermal Process on Heavy Metals Stabilization in Medical Waste Incinerator Fly Ash].

[Novel Process Utilizing Alkalis Assisted Hydrothermal Process to Stabilize Heavy Metals Both from Municipal Solid Waste or Medical Waste Incinerator Fly Ash and Waste Water].

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Heavy metals stabilization in medical waste incinerator fly ash using alkaline assisted supercritical water technology.

Assessment of heavy metals mobility and correlative recovery and decontamination from MSWI fly ash: Mechanism and hydrometallurgical process evaluation

Hydrothermal stabilization of fly ash from a fluidized bed incinerator co-firing refuse and coal

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Stabilization of Heavy Metals in Municipal Solid Waste Incineration Fly Ash in Circulating Fluidized Bed by Microwave-Assisted Hydrothermal Treatment with Additives

Waste Control by Waste: Co-Treatment of Municipal Solid Waste Incineration Fly Ash and High Arsenic-Containing Wastewater

Recovery of Zn and Cu from municipal solid waste incineration fly ash by integrating ammonium leaching and ammonia removal

Simultaneous realization of heavy metal Cd solidification and chloride separation in municipal solid waste incineration fly ash: Mechanism and DFT analysis

Effects of Hydrothermal Treatment on the Major Heavy Metals in Fly Ash from Municipal Solid Waste Incineration

Fly Ash Treatment by Desalination Couples with Solidification of Heavy Metals

Reduced Utilization Process Leaching Toxicity by Stabilizing Heavy Metals in Fly Ash from MSW Incineration Based on Hydrothermal Oxidation

Removal of heavy metals from fly ash using electrodialysis driven by a bioelectrochemical system: a case study of Pb, Mn, Cu and Cd

Chemical stabilization of heavy metals in municipal solid waste incineration fly ash: a review

Possibility of Removing Cadmium Pollution from the Environment Using a Newly Synthesized Material Coal Fly Ash

Leaching Characteristics of Heavy Metals in Municipal Solid Waste Incinerator Fly Ash