Abstract:Wastewater discharges from industrial processes typically include elevated concentrations of contaminants, which largely consist of potentially harmful chemicals such as heavy metals. These contaminants are characterized by their slow rate of decomposition. Hence, the removal of these metallic ions from effluents poses a challenge. Among different treatments, the adsorption approach has considerable potential due to its ability to effectively eliminate both soluble and insoluble pollutants from effluent, even at lower levels of concentration. Of various wastes, fly ash (FA) material has been the subject of attention because it is abundant, has favorable qualities, and contains a high percentage of minerals. This review investigates multiple facets, with a specific focus on the application of FA, an industrial byproduct, as an adsorbent in removing heavy metals. A comprehensive examination was conducted on a range of concerns pertaining to the pollution caused by metallic ions, including the underlying causes, levels of contamination, health implications of heavy metals, and removal methods. Multiple factors were found to affect the adsorption process. Of all the factors, the pH value considerably influences the elimination of heavy metals. An acidic pH range of 2.5–4.5 was found to be optimal for achieving the highest possible elimination of As(V), Cu(II), Hg(II), and Cr(VI). The latter elimination rate reached 89% at the optimal pH level. Most heavy metals’ adsorption isotherms conformed to the Langmuir or Freundlich models, while the pseudo-second-order kinetics provided a satisfactory match for their removal. Using a raw FA, adsorption capacities were achieved in the removal of metallic ions, Ni(II), Pb(II), and Cr(VI), that ranged from 14.0 to 23.9 mg g−1. Meanwhile, the FA-zeolite showed a remarkable capacity to adsorb ions Mn(II), Ni(II), Cd(II), Cu(II), and Pb(II), with values ranging from about 31 to 66 mg g−1. The cost analysis showed that the treatment of FA is economically advantageous and may result in significant cost reductions in comparison to commercial adsorbents. In summary, FA is an inexpensive waste material with potential for water treatment applications and several other purposes due to its excellent chemical and mineralogical composition.

Utilization Of Fly Ash In Heavy Metal Removal From Acid Mine Drainage

A study on removal characteristics of heavy metals from aqueous solution by fly ash

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

Adsorption of Metal Ions in Wastewater on Fly Ash

Wastewater Treatment Utilizing Industrial Waste Fly Ash as a Low-Cost Adsorbent for Heavy Metal Removal: Literature Review

Adsorption of heavy metal ions from aqueous solution by fly ash

Adsorptive removal of five heavy metals from water using blast furnace slag and fly ash

Assessing the Capability of Chemical Ameliorants to Reduce the Bioavailability of Heavy Metals in Bulk Fly Ash Contaminated Soil

The Stability of pH and the Concentrations of Iron and Manganese in Acid Mine Drainage Following Coal Fly Ash and Empty Fruit Bunch of Oil Palm Treatments

Evaluation of Ultrasound-assisted Modified Fly Ash for Treatment of Acid Mine Drainage

Metal removal from acid mine lake using ultrasound-assisted modified fly ash at different frequencies

An effective way to utilize solid waste resources: The application of modified fly ash in removing Cu 2+ and Pb 2+ in wastewater

Study on the adsorption of Zn(II) and Cu(II) in acid mine drainage by fly ash loaded nano-FeS

Treatment of Fly-Ash-Contaminated Wastewater Loaded with Heavy Metals by Using Fly-Ash-Synthesized Iron Oxide Nanoparticles

Utilization of KOH-modified fly ash for elimination from aqueous solutions of potentially toxic metal ions

Removal of Heavy Metals from MSWI Fly Ash Using Acidithiobacillus Strains: Effects of Substrate Concentration

Adsorption Properties of Fly Ash Towards Bivalent Metal Ions

Co-disposal of Heavy Metals Containing Waste Water and Medical Waste Incinerator Fly Ash by Hydrothermal Process with Addition of Sodium Carbonate: A Case Study on Cu(II) Removal

Stabilization of lead in waste water and farmland soil using modified coal fly ash

Heavy Metal Removal from Aqueous Solutions Using Fly-Ash Derived Zeolite NaP1

[Novel Process Utilizing Alkalis Assisted Hydrothermal Process to Stabilize Heavy Metals Both from Municipal Solid Waste or Medical Waste Incinerator Fly Ash and Waste Water].