Abstract:In recent years, precise metrology up to nanoscale has attracted substantial attention due to an increasing need for ultra-precision measurement systems for micro electro mechanical systems (MEMS) and nano electro mechanical systems (NEMS) calibration. In this paper, an analytical and numerical investigation for the proposed design of a 6-degree-of-freedom (6-dof) universal measurement system, using a relatively simple and inexpensive but highly sensitive set up, is presented. This system utilizes a convex mirror and two flat mirrors, one angled and one vertical, as targets to reflect laser beams onto photo detectors. These targets, placed on the object of interest for metrology applications, change the direction of the reflected beam when there is any movement in the object, which is detected by the photo detectors. The use of convex and angled mirrors greatly enhances the sensitivity of the system. Geometric relationships are established among all the optical components to predict the final intersection points of the laser beams reflected from the targets with the photo detector planes. These relationships are used to establish a Jacobian partial derivative matrix, which is further used to estimate the target pose when the photo detector outputs are given. Numerical simulation of the measurement process is performed using MATLAB®. Assuming the approximate distance from laser beam origin to target and the target to photo detector as 50 mm, and photo detector resolution as 0.1 µm, translations and rotations less than 50 nm and 2 arc sec, respectively, can be measured accurately. The highest amount of sensitivity in translation is obtained along the Z-axis with minimum a measurement of 3.4 nm; the highest amount of sensitivity in rotation is along the pitch-axis with a minimum measurement of 0.145 arc sec. The corresponding low sensitivity axes are X-axis and yaw-axis, with minimum measurements of 35 nm and 2 arc sec, respectively. The sensitivity and the resolution of the system can be increased many times further by increasing the curvature of the convex mirror or by increasing the distance between the target and the detectors. The analytical and simulation results of this work yield a scientific and engineering guideline for the development of meso, micro, as well as nanoscale metrology systems.

A novel high accuracy micrometer for the measurement of diameter

Error Separation Method For Precision Measurement Of The Run-Out Of A Microdrill Bit By Using A Laser Scan Micrometer Measurement System

On-line Qualification of a Micro Probing System for Precision Length Measurement of Micro-Features on Precision Parts

A Micro-Coordinate Measurement Machine (cmm) for Large-Scale Dimensional Measurement of Micro-Slits

A Novel Method for Diameter Measurement of Silicon Single Crystal

Nanometrology of an Ultraprecision Machined Surface by Using Optical Sensors

Improvement of the Russian National Secondary Standard of the Unit of Length Using Latest Ultra-Stable Laser Equipment

A novel scanning tunneling microscopy for long range and high aspect ratio measurement

Non-contact ultra-precision metrology of superfine cylinders with a developed two-dimensional coordinate measuring device

Wide-range length metrology by dual-imaging-unit atomic force microscope based on porous alumina.

Measurement of Large Internal Diameters with A Compact Apparatus Based on Dual-Wavelength Heterodyne Interferometer

AN ANALYTICAL DEVELOPMENT OF A UNIVERSAL DISPLACEMENT MEASUREMENT SYSTEM FOR ULTRA-PRECISION METROLOGY

A wide-range metrology AFM and its applications

Measurement of Nano-step Height Scales with a Metrological AFM Head

Dual imaging-unit atomic force microscope for nanometer order length metrology based on reference scales

Ultrahigh-Precision Diameter Control of Nanofiber Using Direct Mode Cutoff Feedback

Improved Accuracy for Measurement of Filament Diameter Based on Image-Based Fitting Method

Nanoprecision Measurement of High-Aspect-Ratio Microholes Using Sub-100-μm Tungsten Ball Tip

An New Instrument for Measuring Mechanical Compliance of Micro-Systems

Long Range And Accurate Measurement Of Deep Trench Microstructures By A Specialized Scanning Tunneling Microscope

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway