Abstract:The membrane extraction of copper ions was carried out using hydrophobic poly(propylene) (PP) hollow fiber membrane modules and kerosene solutions containing organic extractant. The influences of different extractant on the extraction yield, mass transfer performance and mass transfer mechanism were studied. Compared with 2-ethylhexyl phosphoric acid (2EHPA) and 2-methyl-5-sulpho benzaldoxime (2M5SB), di-(2-ethylhexyl)phosphoric acid (D2EHPA) extractant system with high distribution coefficient exhibited higher extraction yield of 99.7%. The extraction equilibrium time, the final extraction yield and the total mass transfer coefficient were independent of the flow rates of two phases. The extraction equilibrium time and the final extraction yield at different flow rates of two phases were 80 min and near 99.5%, respectively. A mass transfer model of a complexation reaction describing the overall mass transfer resistance was controlled by interfacial reactions rather than the aqueous and organic boundary layer which could explain the effect of flow rate on the final extraction yield and the total mass transfer coefficient. This model showed that the mass transfer resistance and mass transfer coefficient were independent Of Cu2+ when copper ion concentration was more than 0.06 g/L. However, when copper concentration was less than 0.06 g/l, the mass transfer resistance increased as Cu2+ concentration decreased, and the mass transfer coefficient decreased as Cu2+ concentration decreased. Extractant entrainment in the aqueous phase and membrane fouling were investigated primarily. It was found that the solvent entrainment could reduce to 10ppm much lower than 200ppm of the classic liquid-liquid extraction, and that the cleaning of contaminated membranes was not complete. However, it can be still concluded from this research that the membrane extraction in PP hollow fibre with D2EHPA extractant would be an effective and promising processing means for Cu2+ separation from aqueous solution. Copyright (c) 2005 John Wiley & Sons, Ltd.

Experimental results and optimization via design of experiment (DOE) of the copper ion recovery from aqueous solutions using emulsion liquid membrane (ELM) method

Recovery of Manganese Ions from Aqueous Solutions with Cyanex 272 Using Emulsion Liquid Membrane Technique: A Design of Experiment Study

EXPERIMENTAL DESIGN FOR THE OPTIMIZATION OF COPPER BIOSORPTION BY IMMOBILIZED NANOSCALE Lentinus Edodes

Membrane Extraction For Separation Of Copper Cations From Acid Solution Using Polypropylene Hollow Fibre Membrane

Extraction of Metal Ions by ELM Separation Technology

Kinetic Modeling of Electromembrane Extraction of Copper using a Novel Electrolytic Cell Provided with a Supported Liquid Membrane

Emulsion liquid membrane technique for optimal separation of Ni (II) and Sm (III) using response surface methodology and Box–Behnken experimental setup

Review of emulsion liquid membrane for heavy metals recovery from wastewater/water: Stability, efficiency, and optimization

A New Idea for Efficient Copper Recovery from Wastewater by Electrodeposition: Adsorption Pretreatment

Research Progress of Liquid Membrane Emulsion Technique for Metal Ions Separation and Recovery

High Flux Recovery of Copper(Ii) from Ammoniacal Solution with Stable Sandwich Supported Liquid Membrane

Modeling and optimization of surface quality of copper deposits recovered from brass scrap by direct electrowinning

Hydrodynamic features of pulsed solvent extractor for separation of two metals by using the antagonistic effect of solvents

An energy efficient hybrid membrane technique for the removal of toxic metals from aquatic environment

Study of copper removal by modified biomaterials using the response surface methodology, DFT Calculation, and molecular dynamic simulation

Recovery of copper and water from copper-electroplating wastewater by the combination process of electrolysis and electrodialysis

A simulation study of an electro-membrane extraction for enhancement of the ion transport via tailoring the electrostatic properties

A simulation study of an applied approach to enhance drug recovery through electromembrane extraction

Selective Electrochemical Extraction of Copper from Multi-Metal E-Waste Leaching Solution and Its Enhanced Recovery Mechanism.

Optimization of copper recovery from electronic waste using response surface methodology and Monte Carlo simulation under uncertainty

Copper Recovery from Industrial Bimetallic Composite Ionic Liquids by Direct Electrodeposition and the Effect of Temperature and Ultrasound