Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. This study proposes a design method of internal meshing gear with elliptical contact path, and its contact characteristics are analyzed. The tooth profile of the internal meshing gear is actively designed based on elliptical meshing line (EML). Firstly, the elliptic meshing line is established according to the principle of differential geometry. The intersection points of the index circle and the tooth top circle of the internal meshing gear are on the meshing line. And the length of the minor axis of the elliptical meshing line can be set arbitrarily. Secondly, based on the rack equation and plane coordinate transformation, the tooth top profile equation of the EML gear was derived. Finally, the root tooth profile equations are derived from the top tooth profile equations based on the gear meshing principle. The theoretical model of EML gear is verified by finite element method. The contact stress, meshing stiffness and transmission error of minor axis of elliptic meshing line under different lengths are analyzed. The results show that by adjusting the length of the minor axis appropriately, the contact stress, mesh stiffness and transmission error of the EML gear will be reduced accordingly. Compared with involute gears, the contact stress of EML gears is reduced by 58.76%, the mesh stiffness is increased by 68.38%, and the transmission error is reduced by 40.62%. The contact performance of internal gears is greatly improved. By modifying the minor axis length of the elliptic meshing line of EML gear, the tooth profile of EML gear can be automatically modified through the equation relationship between the minor axis length and the tooth profile, so that the tooth profile design is more efficient. This study provides a reference for improving the performance of internal meshing gears.

Mathematical model and meshing analysis of internal meshing gear transmission with curve element

Mathematical design and meshing analysis of a new internal gear transmission based on spatial involute-helix curve

Generation and Meshing Analysis of a New Type of Double Helical Gear Transmission

Quasi-static Tooth Contact Analysis of Hypoid Gear Drive with Coaxiality Deviations

Computerized design and analysis of a novel high load bearing internal gear drive with curved meshing line

Geometric design and contact analysis of internal meshing gears with elliptical contact path

Parameter design of double-circular-arc tooth profile and its influence on meshing characteristics of harmonic drive

Mathematic model and tooth contact analysis of a new spiral non-circular bevel gear

Contact Finite Element Method for Dynamic Meshing Characteristics Analysis of Continuous Engaged Gear Drives

A general mathematical modeling and finite element analysis of a strain wave gear possessing a double-circular-arc-with-a-common-tangent profile

Tooth Contact Analysis of Involute Gear

Tooth profile design and meshing characteristics analysis of internal meshing gears based on variable center meshing line

Theoretical Investigation of Mesh Relationship and Mesh Stiffness of Internal Spur Gears with Tooth Wear

Comparison on torsional mesh stiffness and contact ratio of involute internal gear and high contact ratio internal gear

Contact stresses and bending stresses analysis of curvilinear cylindrical gears generated by a face-milling cutter with parabolic profile

A modeling and tooth contact analysis method of parabolic modified face gear

Design of piecewise deformed elliptical gear with closed pitch curve and its conjugate pair

Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation

Geometric design and analysis of face-gear drive with involute helical pinion

The Finite Element Modal Analysis of the Cosine Gear

Research on the Discrete Algorithm of Tooth Surface for a Curve-Face Gear