Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Rack-and-pinion gear sets with variable transmission ratios have gradually become a standard core component in steering systems, as the harmony between portability and sensitivity in vehicle steering can be achieved with such applications. When the conventional meshing theory is adopted to calculate point clouds of variable-ratio tooth surfaces, drawbacks will occur with respect to unevenness in point cloud density, inaccessible tooth surface boundaries, and point cloud fusion at the interface between the working tooth surface and fillet. Thus, the generated point cloud of variable ratio tooth surfaces is inapplicable for computer-aided engineering (CAE) and plastic forming. In this study, the point cloud reconstruction of pinion tooth surfaces with variable transmission ratio was investigated. Meanwhile, based on the analysis of transient length in contact lines that occur during gear meshing, various criteria were proposed to determine the validity of the variable-ratio rack-and-pinion design in terms of whether continuous and reverse driving can be achieved. By adopting the proposed methods, the designed variable-ratio pinion tooth surfaces demonstrate point clouds with equidistant distributions and clear boundaries. CAE analysis results also indicate a good quality in gear meshing. The real-time gear meshing status of variable-ratio rack-and-pinion sets is characterized by the transient length of contact lines. The measured variation curves for the transmission ratios of a prototype demonstrate significant consistency with the theoretical curves, indicated by attaining transmission ratio errors within a reasonable range. The validity of the design methods proposed in this study has been verified by the aforementioned results.

Research on the Discrete Algorithm of Tooth Surface for a Curve-Face Gear

RESEARCH ON THE MANUFACTURING AND EVALUATION METHOD FOR A CURVE-FACE GEAR

A Generalized Algorithm and Simulation Verification of Non-circular Gear Tooth Surface Data Points

Geometric design and analysis of face-gear drive with involute helical pinion

Research on simplification of face gear tooth surface design

An adaptive geometric meshing theory for the face-milled generated spiral bevel gears

Research on tooth surface design and side milling machining method of ruled line face gear

Precise modeling of complex tooth surface microtopography and multi-degree-of-freedom nonlinear friction dynamics for high-performance face gear

Contact Analysis of Real Tooth Surface of Hypoid Gear with Cycloid Tooth

Computerized Investigation of Real Tooth Contact Analysis of Face-milled Spiral Bevel Gears

The Research on Generating Method of Three Dimensional Digital Tooth Surfaces

An advanced CAD/CAE integration method for the generative design of face gears

A modeling and tooth contact analysis method of parabolic modified face gear

Computerized Design and Analysis of Face-Milled, Uniform Tooth Height Spiral Bevel Gear Drives

Investigating tooth surface reconstruction principle of a gear rack and pinion system with variable transmission ratio pinion

Generation and Meshing Analysis of a New Type of Double Helical Gear Transmission

An Analysis of the Kinematical Characteristics of an Eccentric Curve-Face Gear Pair with Compound Motion

A finishing method for the continuous generation of spur face gears with shaving cutters

Mathematical model and meshing analysis of internal meshing gear transmission with curve element

Tooth surface geometry optimization of spiral bevel and hypoid gears generated by duplex helical method with circular profile blade

A new slotting method for 2D digital gear tooth surfaces