Tooth Contact Analysis of Involute Gear

李杰,孙青军,王乐勤

DOI: https://doi.org/10.3785/j.issn.1006-754x.2009.01.006

2009-01-01

Journal of Engineering Design

Abstract:Based on Hertz stress expression,one pair of meshing teeth was equivalent to two contacting cylinders and then the theoretic expression of gear tooth contact expression was derived.A finite element method(FEM) for one pair of meshing teeth was established.This method established parameterized tooth profile according to involute and root transitional curve equations with defined intervals.In this method,the rim thickness was 3 times of module and the circumferential width was 3 times of tooth thickness,too.Grid refining process was adopted on contacting edge and equalized tangential forces and fixed constraints were applied respectively on the inner rims of driving and driven gears.The results from FEM and theoretical formula were in excellent agreement with less than 5% errors,and FEM was proved to be suitable for gear pairs with different tooth parameters.From FEM,the contact stress obeys the semi-ellipse distribution and the Mises stress and shear stress are also consistent with contact mechanics theory,but there exists offset or deflection in the symmetric lines of stress distribution,which originates from tooth bending deformation.