Abstract:<p>High solid loading of ceramic slurry limits the wider use of digital light processing (DLP) in the production of porous ceramic scaffolds with advanced functions. The top-down digital light processing (DLP) system is a potential method to achieve ceramic-resin slurry with high solid loading. Porous β-tricalcium phosphate/58S bioglass (β-TCP/BG) scaffolds with high solid loading ceramic slurry were fabricated by the top-down DLP technique in this paper. Photosensitive β-TCP/BG-resin slurries with various solid loadings for DLP were developed and the effects of solid loading on viscosity and curing reactivity were evaluated. The microstructure, mechanical strength, porosity, and shrinkage of the composite scaffolds were then explored. The results show that the maximum viscosity of the β-TCP/BG-resin slurry for top-down DLP technique was 85.92 Pa·s with a solid loading of 60wt%. The cure depth and overgrowth tended to decrease with the solid loading. The curing depth exceeds 100μm at each solid loading after 18000ms irradiation time. The shaping error and sintering shrinkage of the porous structure were estimated, and it was found that the pore size and sintering shrinkage reaching a minimum value for the scaffolds fabricated by the slurry of 60wt%. The compressive strength of the β-TCP/BG scaffolds increased with the solid loading increased, reaching a maximum value of 11.43 ± 0.4 MPa for the solid loading of 60 wt%. β-TCP/BG scaffolds exhibited an alkalescent pH environment and an improved ability of apatite-mineralization formation, meanwhile Ca, P and Si were gradually released from scaffolds. Furthermore, in vitro evaluation of β-TCP/BG scaffolds was carried out to assess the osteogenic capability. The composite scaffolds displayed intensifying biocompatibility and can facilitate osteoblast proliferation, adhesion, and differentiation. The β-TCP/BG composite scaffold fabricated by top-down DLP with high solid loading ceramic slurry could be considered as a promising alternative substitute even for load-bearing bone tissue engineering applications.</p>

Development of a high solid loading β-TCP suspension with a low refractive index contrast for DLP -based ceramic stereolithography

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Fabrication of porous β-TCP/58S bioglass scaffolds via top-down DLP printing with high solid loading ceramic-resin slurry

Dlp 3d Printing Porous Beta-Tricalcium Phosphate Scaffold By The Use Of Acrylate/Ceramic Composite Slurry

DLP 3D printing porous β-tricalcium phosphate scaffold by the use of acrylate/ceramic composite slurry

3D Printing Magnesium-Doped Wollastonite/β-Tcp Bioceramics Scaffolds with High Strength and Adjustable Degradation

Digital Light Processing Strength-Strong Ultra-Thin Bioceramic Scaffolds for Challengeable Orbital Bone Regeneration and Repair in Situ

Digital light processing (DLP) of nano biphasic calcium phosphate bioceramic for making bone tissue engineering scaffolds

Fabrication and Biological Evaluation of Porous Β-Tcp Bioceramics Produced Using Digital Light Processing

POLYMER-DERIVED SIC CERAMIC WITH TRIPLY PERIOD MINIMAL SURFACE STRUCTURE FABRICATION THROUGH DIGITAL LIGHT PROCESSING

Preparation and Characterization of Β-Tricalcium Phosphate/Nano Clay Composite Scaffolds Via Digital Light Processing Printing

3D robocasting magnesium-doped wollastonite/TCP bioceramic scaffolds with improved bone regeneration capacity in critical sized calvarial defects

Biocompatibility and Osteointegration Capability of Β-Tcp Manufactured by Stereolithography 3D Printing: in Vitro Study

Digital light processing of β-tricalcium phosphate bioceramic scaffolds with controllable porous structures for patient specific craniomaxillofacial bone reconstruction

3D-Printed Triply Periodic Minimal Surface Bioceramic Scaffold for Bone Defect Treatment with Tunable Structure and Mechanical Properties

Liquid Crystal Display Technique (LCD) for High Resolution 3D Printing of Triply Periodic Minimal Surface Lattices Bioceramics

Effect of Graphite Particles As Additive on the Curing Behaviour of Β-Tricalcium Phosphate Suspensions and Scaffold Fabrication by Digital Light Processing

Digital light processing porous TPMS structural HA & akermanite bioceramics with optimized performance for cancellous bone repair

Engineering Precise Interconnected Porosity in β-Tricalcium Phosphate (β-TCP) Matrices by Means of Top–Down Digital Light Processing

Development of Strong and Tough Β-Tcp/pcl Composite Scaffolds with Interconnected Porosity by Digital Light Processing and Partial Infiltration.

Development of Strong and Tough beta-TCP/PCL Composite Scaffolds with Interconnected Porosity by Digital Light Processing and Partial Infiltration