Abstract:The osteoinductivity of 3D printed calcium phosphate (CaP) ceramics has a large gap compared with those prepared by conventional foaming methods, and improving the osteoinductivity of 3D printing CaP ceramics is crucial for successful application in bone regeneration. Pore architecture plays a critical role in osteoinductivity. In this study, CaP ceramics with a hexagonal close-packed (HCP) spherical pore structure were successfully fabricated using DLP printing technology. Additionally, octahedral (Octahedral), diamond (Diamond), and helical (Gyroid) structures were constructed with similar porosity and macropore diameter. CaP ceramics with the HCP structure exhibited higher compression strength (8.39 ± 1.82 MPa) and lower permeability (6.41 × 10-11 m2) compared to the Octahedral, Diamond, and Gyroid structures. In vitro cellular responses indicated that the macropore architecture strongly influenced the local growth rate of osteoblast-formed cell tissue; cells grew uniformly and formed circular rings in the HCP group. Furthermore, the HCP group promoted the expression of osteogenic genes and proteins more effectively than the other three groups. The outstanding osteoinductivity of the HCP group was confirmed in canine intramuscular implantation studies, where the new bone area reached up to 8.02 ± 1.94 % after a 10-week implantation. Additionally, the HCP group showed effective bone regeneration in repairing femoral condyle defects. Therefore, our findings suggest that 3D printed CaP bioceramics with an HCP structure promote osteoinductivity and can be considered as candidates for personalized precise treatment of bone defects in clinical applications. STATEMENT OF SIGNIFICANCE: 1. 3D printing BCP ceramics with high osteoinductivity were constructed through pore architecture optimization. 2. BCP ceramics with HCP structure exhibited relatively higher mechanical strength and lower permeability than those with Octahedral, Diamond and Gyroid structures. 3. BCP ceramics with HCP structure could promote the osteogenic differentiation of MC3T3-E1, and showed the superior in-vivo osteoinductivity and bone regeneration comparing with the other structures.

High performance hydroxyapatite ceramics and a triply periodic minimum surface structure fabricated by digital light processing 3D printing

3D printing of hydroxyapatite scaffolds with good mechanical and biocompatible properties by digital light processing

POLYMER-DERIVED SIC CERAMIC WITH TRIPLY PERIOD MINIMAL SURFACE STRUCTURE FABRICATION THROUGH DIGITAL LIGHT PROCESSING

Fabrication and Biological Evaluation of 3D-Printed Calcium Phosphate Ceramic Scaffolds with Distinct Macroporous Geometries Through Digital Light Processing Technology.

3D printing calcium phosphate ceramics with high osteoinductivity through pore architecture optimization

Stereolithography-Based Additive Manufacturing of High-Performance Osteoinductive Calcium Phosphate Ceramics by a Digital Light-Processing System

Nano-Hydroxyapatite Bone Scaffolds with Different Porous Structures Processed by Digital Light Processing 3D Printing

Additive Manufacturing of Hydroxyapatite Bioceramic Scaffolds with Projection Based 3D Printing

Study of falling‐down‐type DLP 3D printing technology for high‐resolution hydroxyapatite scaffolds

Ultrahigh Strength of Three-Dimensional Printed Diluted Magnesium Doping Wollastonite Porous Scaffolds

Zirconia toughened hydroxyapatite biocomposite formed by a DLP 3D printing process for potential bone tissue engineering

Additive manufacturing of ceramic alumina/calcium phosphate structures by DLP 3D printing

Development of three-dimensional printing polymer-ceramic scaffolds with enhanced compressive properties and tuneable resorption

3D printing of hydroxyapatite/tricalcium phosphate scaffold with hierarchical porous structure for bone regeneration

369Fabrication of 3D gel-printed β-tricalcium phosphate/titanium dioxide porous scaffolds for cancellous bone tissue engineering

Fabrication of the porous hydroxyapatite implant by 3D printing

Three-Dimensionally Printed Bionic Hydroxyapatite (HAp) Ceramic Scaffolds with Different Structures and Porosities: Strength, Biocompatibility, and Biomedical Application Potential

3D-Printed Triply Periodic Minimal Surface Bioceramic Scaffold for Bone Defect Treatment with Tunable Structure and Mechanical Properties

Microstructures and mechanical properties of biphasic calcium phosphate bioceramics fabricated by SLA 3D printing

Additive manufacturing of hydroxyapatite bioceramic scaffolds: Dispersion, digital light processing, sintering, mechanical properties, and biocompatibility

Fabrication and in Vitro Evaluation of 3D Printed Porous Silicate Substituted Calcium Phosphate Scaffolds for Bone Tissue Engineering