Abstract:This study aimed to address the need for alternative materials in the anode layer to enhance the performance of dye-sensitized solar cells (DSSCs). The synthesis of titanium dioxide/reduced graphene oxide (TiO 2 /rGO) was carried out using the response surface methodology by face central composite design (RSM/FCC). This method allowed us to systematically evaluate the influence of two key factors, namely the weight percentage of precursor graphene oxide (GO wt%) and the L-ascorbic acid ratio, | on the power conversion efficiency (PCE) of DSSCs. Our research is significant because it explores the synthesis of TiO 2 /rGO as a novel material for the anode layer in DSSCs. This material holds promise for improving device performance due to its unique properties, such as enhanced charge transport and light harvesting capabilities. Additionally, TiO 2 /rGO can serve multiple functions within the DSSCs device, acting not only as a charge transport layer but also potentially as a light scattering layer to increase photon absorption. The statistical analysis revealed that the GO wt% had a more significant influence on PCE compared to the L-ascorbic acid ratio. Furthermore, our simulation results demonstrated high validity and accuracy, with a correlation coefficient (R2) of 0.9988 and a residual standard error of less than 5%. The optimized DSSCs-based TiO 2 /rGO anode achieved a remarkable PCE of 7.12%, representing a 29% improvement compared to the pure TiO 2 -based DSSCs anode. In summary, our study highlights the importance of synthesizing TiO 2 /rGO as a novel material for the anode layer in DSSCs and demonstrates its potential for significantly enhancing device performance. This study emphasizes these key points more prominently in the abstract to better convey the novelty and significance of our findings.

Improved Performance of DSSC Photoanodes After the Modification of TiO2 with Reduced Graphene Oxide

Enhanced Performance of Dye Sensitized Solar Cells by Using a Reduced Graphene Oxide/tio 2 Blocking Layer in the Photoanode

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Enhanced Performance of the Dye-Sensitized Solar Cells by the Introduction of Graphene Oxide into the TiO2 Photoanode

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Improved DSSC photovoltaic performance using reduced graphene oxide–carbon nanotube/platinum assisted with customised triple-tail surfactant as counter electrode and zinc oxide nanowire/titanium dioxide nanoparticle bilayer nanocomposite as photoanode

Fluorine-free synthesis of reduced graphene oxide modified anatase TiO2 nanoflowers photoanode with highly exposed {0 0 1} facets for high performance dye-sensitized solar cell

Highly transparent graphene oxide composited TiO2 thin film as efficient photoanode for dye-sensitized solar cells

Perovskite zinc titanate-reduced graphene oxide nanocomposite photoanode for improved photovoltaic performance in dye-sensitized solar cell

Unusual enhancement in efficiency of DSSCs upon modifying photoanodes with reduced graphene oxide

Synthesis of titanium dioxide/reduced graphene oxide nanocomposite material via the incorporated hydrothermal co-precipitation method for fabricating photoanode in dye-sensitized solar cell

Surface modification of TiO 2 photoanode in dye-sensitized solar cells using reduced graphene oxide: A computational and experimental study

Optimization of Preparation Conditions by Response Surface Methodology for Synthesis of Titanium Dioxide/Reduced Graphene Oxide Composite in Dye-Sensitized Solar Cells

Strontium titanate perovskite embedded reduced graphene oxide photoanode for dye-sensitized solar cell

Synthesis of titanium dioxide/reduced graphene oxide nanocomposite by ultrasound-assisted mechanical mixing method for fabricating photoanode to upgrade the performance and stability of dye-sensitized solar cell

Synthesis of titanium dioxide nanorods combining with titanium dioxide nanoparticles/reduced graphene oxide nanocomposite for fabrication of photoanodes in dye–sensitized solar cells

An investigation on surface modified TiO2 incorporated with graphene oxide for dye-sensitized solar cell

Enhanced photovoltaic performance of a dye-sensitized solar cell using graphene-TiO2 photoanode prepared by a novel in situ simultaneous reduction-hydrolysis technique.

Incorporation of Ag decorated rGO ON TiO2/dye photoanode for dye-sensitized solar cell applications