Abstract:This study first investigates the preparation and characterization of titanium dioxide/reduced graphene oxide (TiO2/rGO) and then proposes the fabrication of photoanode in dye-sensitized solar cell (DSSC) from synthesized materials. Herein, the TiO2/rGO nanocomposites were prepared by the incorporation of hydrothermal approach and co-precipitation method from the precursors of titanium (IV) isopropoxide and graphene oxide. The fabrication of photoanode from the as-prepared TiO2/rGO nanocomposite paste was carried out using screen-printing technique. The performance of fabricated DSSCs was evaluated by current density-voltage curves and electrochemical impedance spectroscopy. The characterizations of TiO2 nanoparticles, TiO2/rGO nanocomposites, and their precursors were confirmed by ultraviolet-visible spectroscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, and transmission electron microscopy. Experimental data showed that the optimal rGO weight percentage of 0.6% in the TiO2/rGO nanocomposite material fabricated DSSC successfully with the highest values of short-circuit current density (17.65 mA/cm2) and energy conversion efficiency (7.46%), approximately increasing 24% and 25%, respectively, in comparison with the pristine TiO2 material. Characterization results indicated that the incorporated hydrothermal co-precipitation method was efficient in producing well-defined spherical TiO2 nanoparticles decorated on the rGO sheets with an average diameter of 20–25 nm. Therefore, the TiO2/rGO nanocomposites with the eco-friendly and efficient synthesis method are highly promising for manufacturing and commercializing DSSCs widely.

Fluorine-free synthesis of reduced graphene oxide modified anatase TiO2 nanoflowers photoanode with highly exposed {0 0 1} facets for high performance dye-sensitized solar cell

Enhanced Performance of Dye Sensitized Solar Cells by Using a Reduced Graphene Oxide/tio 2 Blocking Layer in the Photoanode

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Enhanced Performance of the Dye-Sensitized Solar Cells by the Introduction of Graphene Oxide into the TiO2photoanode

Facile Synthesis of Nitrogen-Doped Reduced Graphene Oxide As an Efficient Counter Electrode for Dye-Sensitized Solar Cells

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Highly transparent graphene oxide composited TiO2 thin film as efficient photoanode for dye-sensitized solar cells

Improved Performance of DSSC Photoanodes After the Modification of TiO2 with Reduced Graphene Oxide

Strontium titanate perovskite embedded reduced graphene oxide photoanode for dye-sensitized solar cell

Synthesis of titanium dioxide nanorods combining with titanium dioxide nanoparticles/reduced graphene oxide nanocomposite for fabrication of photoanodes in dye–sensitized solar cells

Surface modification of TiO 2 photoanode in dye-sensitized solar cells using reduced graphene oxide: A computational and experimental study

Synthesis of titanium dioxide/reduced graphene oxide nanocomposite material via the incorporated hydrothermal co-precipitation method for fabricating photoanode in dye-sensitized solar cell

Designing of $$\hbox {TiO}_{2}$$ TiO 2 –rGO nanocomposite-based photoanode to enhance the performance of dye-sensitized solar cells

Perovskite zinc titanate-reduced graphene oxide nanocomposite photoanode for improved photovoltaic performance in dye-sensitized solar cell

Synthesis of titanium dioxide/reduced graphene oxide nanocomposite by ultrasound-assisted mechanical mixing method for fabricating photoanode to upgrade the performance and stability of dye-sensitized solar cell

Unusual enhancement in efficiency of DSSCs upon modifying photoanodes with reduced graphene oxide

Designing of $$\hbox {tio}_{2}$$–rgo Nanocomposite-Based Photoanode to Enhance the Performance of Dye-Sensitized Solar Cells

An investigation on surface modified TiO2 incorporated with graphene oxide for dye-sensitized solar cell

Growth of TiO2 Nanoflowers Photoanode for Dye-Sensitized Solar Cells

Tuning the Properties of Reduced Graphene Oxide-Sr0.7Sm0.3Fe0.4Co0.6O3 Nanocomposites as Potential Photoanodes for Dye-Sensitized Solar Cells