Abstract:A theoretical foundation for selecting corrosion-resistant materials is necessary to address the corrosion risks in complex oil and gas fields and tubing for CO 2 capture, utilization, and storage (CCUS). To achieve this, experiments were conducted using actual oilfield simulated formation water as the corrosive medium. Weight-loss corrosion tests and surface analysis methods were employed to investigate and compare the corrosion of four steel materials (C110, 3Cr, 5Cr, and 9Cr) in high mineralization, CO 2 , and trace H 2 S coexistence environments. The results show that all materials experience CO 2 -dominated corrosion under CO 2 and trace H 2 S conditions, with corrosion rates exceeding the controlled limit for oilfields (0.076 mm/y). The corrosion severity is classified as extremely severe, and the corrosion products mainly comprise a mixed carbonate of FeCO 3 and CaCO 3 . Both uniform and localized corrosion rates decrease gradually with increasing chromium content in the materials. The experimental study demonstrates that chromium has good corrosion resistance. The morphology of the corrosion product film transitions from irregular particles to rhombohedral blocks or flakes with increased chromium content. Carbon steel primarily forms Fe x Ca 1-x CO 3 corrosion products with a small amount of Fe 2 O 3 inclusion, while corrosion products in chromium-containing steel include Cr 2 O 3 , Cr(OH) 3 , Fe x Ca 1-x CO 3 , and Fe 2 O 3 . As the chromium content in the steel material increases, the content of Ca and Cl elements in the corrosion product film gradually decreases. These findings provide valuable insights into the corrosion behavior of different steel materials under the challenging conditions of high mineralization, CO 2 -rich, and trace H 2 S environments. They contribute to the theoretical basis for selecting suitable corrosion-resistant tubing materials for oil and gas operations, including CCUS, enabling the industry to mitigate corrosion risks effectively.

Laboratory simulation of carbon dioxide corrosion, influence of alloying elements and hydrochloric acid on the structure and protective properties of corrosion products

Microstructure and Corrosion Resistance of Medical Cobalt-Based Alloys

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Effect of Chromium and Vanadium Alloying of Steels on the Intensity of Carbon Dioxide Corrosion

Corrosion of Alloy Steels Containing 2% Chromium in CO2 Environments

Molecular Dynamics Simulation of Reinforcing Steel Corrosion when Subjected to Both Chloride Attack and Mechanical Loading

Effect of Cyclic Reaction on Corrosion Behavior of Chromium-Containing Alloys in CO2 Gas at 650 °C

The Corrosion Behavior of Co-Cr-Al Alloys Exposed to Mixed Oxygen-Sulfur Atmospheres at 900 °C

Unraveling the Impact of Cr Content on the Corrosion of Tubing Steel in High CO2 and Low H2S Environments

A study by electrochemical impedance spectroscopy and surface analysis of corrosion product layers formed during CO2 corrosion of low alloy steel

Atomic Insights into the Corrosion Behavior of Fe-Cr Alloys in Supercritical CO2 Environment

Corrosion behaviors of steels under supercritical CO2 conditions

Corrosion Behavior of Heat-Resistant Materials in High-Temperature Carbon Dioxide Environment

Comparison of the corrosion of materials in supercritical carbon dioxide, air, and argon environments

Characterization and Simulation Studies on the Corrosion Products of HR230 and 740 H Alloys in CO2 with 7% H2O Environment at 1000 ℃

Anti-corrosion Performance of Chromium-coated Steel in a Carbon Dioxide-saturated Simulated Oilfield Brine

Corrosion Behaviour of Ni-based Alloys 230, 617, and 601 in CO2 Gas at 750 and 850°C

Effect of Microstructure and Heat Treatment on Resistance of Steels to Carbon Dioxide Corrosion

Corrosion Behaviors of Mg-7Gd-5Y-1Nd-0.5Zr Alloys in CO<sub>2</sub> Atmosphere under Different Relative Humidity

Atomic insights into the corrosion behavior of Fe-Cr alloys in supercritical CO 2 environment.

Conductive Polymer/SiO2 Composite as an Anticorrosive Coating Against Carbon Dioxide Corrosion of Mild Steel. A Simulation Study