Abstract:Green corrosion inhibitors have an important role in reducing the corrosion rate of metals and the effects of toxic chemicals in the environment. In this study, the inhibition effect of pomegranate peel extract ( PPE ) with concentration of 0.5, 1, 1.5, 2, 2.5 and 3 g/L on the aluminum 1050 alloy corrosion behavior in the nitric acid solution investigates using the weight loss, electrochemical techniques, scanning electron microscope ( SEM ), atomic force microscope ( AFM ), contact angle images, gas chromatography-mass spectrometer ( GC-MS ) analysis, fourier transform Infrared spectroscopy ( FTIR ) and ultraviolet radiation ( UV-IR ). And, the ( UV-IR ), ( GC-MS ), and FTIR results confirm the presence of many organic compounds (Containing the N , S , and O atoms), which are responsible for inhibitor performance and absorption phenomena. Meanwhile, the electrochemical impedance results ( EIS ) indicate that the double layer capacity decreases and the corrosion resistance (Corrosion current density ( i corr ) from 0.128 to 0.009 mA/cm 2 ) increases with the increase of the inhibitor concentration (The inhibition efficiency increased with increasing the inhibitor concentration from % 54.29 to the % 92.58 at (1 to 3 g/L ). In addition, the corrosion current density decreases with the increase of the inhibitor concentration using the potentiodynamic polarization ( PDP ) test. However, the corrosion rate enhances with increasing the temperature. From the other hand, quantum chemical ( QC ) calculation and molecular dynamics ( MD ) simulation perform to investigate the theory of the adsorption mechanism. According to these studies, the adsorption of PPE on the aluminum 1050 alloy surface is agreement with the langmuir isotherm and as a result it is a mixed-type inhibitor. In final the SEM and AFM results show that the corrosion rate of the aluminum 1050 alloy surface is significantly reduced after the addition of the inhibitor to the corrosive environment. Furthermore, the contact angle image shows that the inhibited aluminum surface has a hydrophobic property in an aqueous solution. And, the QC calculation and MD simulation clarify well the thin layer formation due to the good adsorption of inhibitor (PPE) on the surface of aluminum 1050 alloy in the nitric acid solution, theoretically. It is concluded that PPE will inhibit the surface of aluminum against the corrosion agents in acidic environment and can use as a green inhibitor.

Anti-corrosion Investigation of Polylysine (Amino Acid Polymer) as Efficacious Corrosion Inhibitor for Al in Industrial Acidic Pickling Environment

Study on Inhibition Behavior of Aluminum-Based Detergent

Corrosion Inhibition of Aluminum Alloy in 50% Ethylene Glycol Solution

Anti-corrosion Performance of LY12 Al Alloy Reinforced by Anodic Oxidization and Silanization

A Combined Electrochemical and Theoretical Analysis of Environmentally Benign Polymer for Corrosion Protection of N80 Steel in Sweet Corrosive Environment

Computational Foretelling and Experimental Implementation of the Performance of Polyacrylic Acid and Polyacrylamide Polymers as Eco-Friendly Corrosion Inhibitors for Copper in Nitric Acid

Poly(methyl Methacrylate-Co-n-vinyl-2-pyrrolidone Polymer As Inhibitor for Mild Steel Corrosion in Acidic Media

Effect of polyacrylic acid on the corrosion behaviour of aluminium in sulphuric acid solution

Aloe polysaccharide as an eco-friendly corrosion inhibitor for mild steel in simulated acidic oilfield water: Experimental and theoretical approaches

Estimation of the Inhibition Efficiency of Polysorbate 80 Against the Corrosion of 6061 Aluminum Alloy in Di-Sodium Hydrogen Orthophosphate Solution

The inhibition action of some organic polymers on the corrosion carbon steel in acidic media

Experimental and computational analysis of poly(4-vinyl pyridine) and polyvinylpyrrolidone as effective corrosion inhibitors for low carbon steel in sulfuric acid

Corrosion Protective Coatings from Poly(heterocyclic diphenylamine): Polyaniline Analogues

Exploration of natural polymers for use as green corrosion inhibitors for AZ31 magnesium alloy in saline environment

Effective green corrosion inhibition of aluminium using analgin in acidic medium: an experimental and theoretical study

Epoxy prepolymer as a novel anti-corrosive material for carbon steel in acidic solution: Electrochemical, surface and computational studies

A study of pomegranate peel extract effect on corrosion inhibition performance on aluminum in HNO 3 solution

Electrochemical evaluation of the anti-corrosion potential of selected amino acids on magnesium in aqueous sodium chloride solutions

Performance assessment of poly (methacrylic acid)/silver nanoparticles composite as corrosion inhibitor for aluminium in acidic environment

An effective and smart corrosion inhibitor in acidic environment: Experimental & theoretical studies

Corrosion inhibition of copper alloy of archaeological artifacts in chloride salt solution using Aloe vera green inhibitor