Abstract:Ultrafine iron ore concentrate pose challenges like poor pellets formation performance, low-bursting temperature, and a complex drying thermal regime. To examine the drying characteristics of green pellets of ultrafine iron ore concentrate, we employed Weibull distribution function and Dincer model to fit and analyze the corresponding drying curve. The effects of drying temperature and air speed on the strength of dried pellets were also studied. Our findings reveal that the drying process of green pellets of ultrafine iron ore concentrate involves three stages: ascending speed, constant speed, and descending speed. As the drying temperature and air speed increase, the drying time decreases. The coefficient of determination R2 for the fitted Weibull distribution function model ranged from 0.995 to 0.998, while the R2 value for the Dincer model ranged from 0.990 to 0.996. Both fitted models align with experimental data and prove to be effective. According to the Bi values obtained through the Dincer model, raising the drying air speed in the initial stage and the drying air temperature in the subsequent stage of the drying system can efficiently remove moisture, reduce green pellets rupture risk, and maintain productivity. The moisture diffusion coefficient and convective mass transfer coefficient increase with rising temperature and air velocity, following the order of Deff > Dcal > D*eff as determined by the Weibull distribution function, Dincer model, and Fick's second law. Additionally, the activation energy value of ultrafine iron ore concentrate for drying derived from the Arrhenius formula is 4515.60 J/(mol?K). Notably, increasing drying temperature increases the strength of dried particles due to their more compact and dense internal structure. This study offers theoretical support for simulating the drying of green ultrafine iron ore concentrate pellets and provides guidelines for selecting diverse drying conditions and designing drying equipment.

Kinetic model research on drying characteristics of artificial magnetite green pellet

Kinetic Model Research on Drying Characteristics of Composite Green Pellet in Rotary Hearth Furnace

Study on the drying characteristics of green pellets of ultrafine iron ore concentrate

Characteristic and kinetic study of the hot air-drying process of artificial limonite pellets

Microwave drying characteristics and kinetics of hematite pellets

Energy consumption optimization model and system for the pellet drying process of straight grate

Experimental and Numerical Investigation of Convective Drying of Single Coarse Lignite Particles

Microwave Vacuum Drying Properties and Kinetics Model of Radix Paeoniae Rubra Extract

Effect of drying kinetics model on energy efficiency of drying systems

A fractional kinetic model for drying of cement-based porous materials

Modeling of drying kinetics of green peas by reaction engineering approach

Mathematical modeling of thermal behavior of single iron ore pellet during heat hardening oxidation

Effect of thermophysical properties on forced convective hot air drying of multi-layered porous materials

Mathematical modeling of the reaction in an iron ore pellet using a mixture of hydrogen, water vapor, carbon monoxide and carbon dioxide: an isothermal study

Mathematical Models' Establishment of Hot-Air Drying for Spratelloides Gracilis

Improving the Properties of Magnetite Green Pellets with a Novel Organic Composite Binder

Numerical simulation of gas-solid heat transfer and moisture evaporation process in preheating shaft kiln for ferromagnesium pellets

Growth behavior and kinetics of magnetite during magnetization roasting

Experimental and Numerical Investigation of Lignite Particle Drying in A Fixed Bed

Drying Model of Paste Materials in Fluidized Bed with Inert Particles and Immersed Heating Tubes

Experimental and Theoretical Analysis of the Thermostatic Drying Process in Wetted Porous Sand Beds with Different Pore Sizes