Abstract:Ultrafine iron ore concentrate pose challenges like poor pellets formation performance, low-bursting temperature, and a complex drying thermal regime. To examine the drying characteristics of green pellets of ultrafine iron ore concentrate, we employed Weibull distribution function and Dincer model to fit and analyze the corresponding drying curve. The effects of drying temperature and air speed on the strength of dried pellets were also studied. Our findings reveal that the drying process of green pellets of ultrafine iron ore concentrate involves three stages: ascending speed, constant speed, and descending speed. As the drying temperature and air speed increase, the drying time decreases. The coefficient of determination R2 for the fitted Weibull distribution function model ranged from 0.995 to 0.998, while the R2 value for the Dincer model ranged from 0.990 to 0.996. Both fitted models align with experimental data and prove to be effective. According to the Bi values obtained through the Dincer model, raising the drying air speed in the initial stage and the drying air temperature in the subsequent stage of the drying system can efficiently remove moisture, reduce green pellets rupture risk, and maintain productivity. The moisture diffusion coefficient and convective mass transfer coefficient increase with rising temperature and air velocity, following the order of Deff > Dcal > D*eff as determined by the Weibull distribution function, Dincer model, and Fick's second law. Additionally, the activation energy value of ultrafine iron ore concentrate for drying derived from the Arrhenius formula is 4515.60 J/(mol?K). Notably, increasing drying temperature increases the strength of dried particles due to their more compact and dense internal structure. This study offers theoretical support for simulating the drying of green ultrafine iron ore concentrate pellets and provides guidelines for selecting diverse drying conditions and designing drying equipment.

Characteristic and kinetic study of the hot air-drying process of artificial limonite pellets

A Study on the Influence of Drying and Preheating Parameters on the Roasting Properties of Limonite Pellets

Experimental Investigation on Sintering with High Ratio of Limonite

Study on the drying characteristics of green pellets of ultrafine iron ore concentrate

Kinetic model research on drying characteristics of artificial magnetite green pellet

Study on the Roasting Process of Guisha Limonite Pellets

Enhanced compressive strength of preheated limonite pellets with biomass-derived binders

Kinetic Model Research on Drying Characteristics of Composite Green Pellet in Rotary Hearth Furnace

Microwave drying characteristics and kinetics of hematite pellets

Characteristics and Sintering Mechanisms of Iron Ores with a High Proportion of High-Al2O3 Limonite

Magnetite oxidation mechanism of the air-cooling stage for limonite ore magnetization roasting

Experimental and Numerical Investigation of Convective Drying of Single Coarse Lignite Particles

An Investigation on Reduction and Magnetization of Limonite Using Biomass

Experimental Research on Single Lignite Particle Drying Process in Hot Gas

Drying Characteristics and Kinetics Analyses for Yimin Lignite at Various Temperatures

Preparation of Red Iron by Magnetization Roasting-Hydrothermal Method Using Ultra-Low-Grade Limonite

Effect of biomass fuel on sintering of high mass fraction limonite

Modeling and Analysis of the Drying Process of Lithium-Ion Battery Electrodes Based on Non-Steady-State Drying Kinetics

Study on the Characteristics of Pellet Movement under Different Roasting Temperature in Hopper

An Experimental Study on the Drying Kinetics of Lignite in High Temperature Nitrogen Atmosphere

Enhanced iron extraction from high-phosphorus waste limonite ore via suspension magnetization roasting: A pilot-scale study