Abstract:Conductive polyelectrolytes such as P3CT-Na have been widely used as efficient hole-transporting layers (HTLs) in inverted perovskite solar cells (PSCs) due to their high hole mobility. However, the acid–base neutralization reaction is indispensable for preparing such polyelectrolytes and the varied content of cations usually leads to poor reproducibility of the device performance in PSCs. In this work, a commercially available polymer poly[3-(4-carboxybutyl)thiophene-2,5-diyl] (P3CT) was directly applied as an HTL in PSCs for the first time. Encouragingly, it was found that due to the dual functionality of carboxyl groups on side chains, a thin layer of P3CT can not only strongly anchor on ITO electrode and optimize its work function but also show an effective passivation effect toward perovskite active layer. Benefiting from such dual functionality, a uniform perovskite film with better quality was obtained on P3CT. As a result, the P3CT-based PSCs show much lower nonradiative recombination and achieve a champion power conversion efficiency (PCE) of 21.33% with a high fill factor (FF) of 83.6%. Impressively, as the device area is increased to 0.80 cm<sup>2</sup>, a PCE of 19.65% can still be obtained for the PSCs based on P3CT HTL. Our work provides important strategy for developing HTLs for high-performance PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00729?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00729</a>.Detailed experimental procedures including materials, PSC device fabrication and characterization, and the detailed data of DFT calculation, UV–vis absorption, FTIR, XRD, and AFM morphology characterization (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00729/suppl_file/am1c00729_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Interface Engineering of Perovskite/Hole Transport Layer Using Nano‐Network Formation in Small Molecule–Polymer Blend for Efficient Inverted Perovskite Solar Cells

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Tailoring Perovskite Adjacent Interfaces by Conjugated Polyelectrolyte for Stable and Efficient Solar Cells

A Newly Crosslinked‐double Network PEDOT:PSS@PEGDMA toward Highly‐Efficient and Stable Tin‐Lead Perovskite Solar Cells

Synchronous Modulation of Hole-Selective Self-Assembled Monolayer and Buried Interface for Inverted Perovskite Solar Cells

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

Molecularly Tailored Perovskite/Poly(3-hexylthiophene) Interfaces for High-performance Solar Cells

Highly Efficient Hole Transport Layer‐Free Low Bandgap Mixed Pb–Sn Perovskite Solar Cells Enabled by a Binary Additive System

Hybrid 3D Nanostructure-Based Hole Transport Layer for Highly Efficient Inverted Perovskite Solar Cells

Improving Hole Transport and Extraction by Interface Engineering in Perovskite Solar Cells

Buried interface engineering enables efficient, scalable and stable inverted perovskite solar cells

Tailoring Multifunctional Self‐Assembled Hole Transporting Molecules for Highly Efficient and Stable Inverted Perovskite Solar Cells

Engineering the buried interface in perovskite solar cells via lattice-matched electron transport layer

Electronically Manipulated Molecular Strategy Enabling Highly Efficient Tin Perovskite Photovoltaics

Tailoring Molecular-Scale Contact at the Perovskite/Polymeric Hole-Transporting Material Interface for Efficient Solar Cells

Field‐Effect Control in Hole Transport Layer Composed of Li:NiO/NiO for Highly Efficient Inverted Planar Perovskite Solar Cells

Ion-Exchange Polymer Network Enhanced Interfacial Compatibility for Stable and Efficient Inverted Perovskite Solar Cells

Interface modification of perovskite solar cell for synergistic effect of surface defect passivation and excited state property enhancement

Molecular Orientation Regulation of Hole Transport Semicrystalline-Polymer Enables High-Performance Carbon-Electrode Perovskite Solar Cells

A charge-separated interfacial hole transport semiconductor for efficient and stable perovskite solar cells

A Dual-Functional Conjugated Polymer as an Efficient Hole-Transporting Layer for High-Performance Inverted Perovskite Solar Cells