Abstract:Interface engineering has been recognized as a very effective method to simultaneously improve both efficiency and stability in perovskite solar cells (PSCs). In this work, we report using an excellent small molecular material tetraphenyldibenzoperiflanthene (DBP) to modify the perovskite/Spiro-OMeTAD interface to achieve significantly improved solar cell performance. It is found that the ultrathin DBP interlayer accelerates hole transfer across the FAxMA1–xPbInBr3–n/Spiro-OMeTAD interface and effectively reduces the nonradiative recombination. The Kelvin probe force microscopy and energy band analyses reveal that the DBP modification helps build better matched energy level alignment and smaller energy loss for more fluent hole transport. Consequently, the DBP-treated PSCs achieve an enhanced open-circuit voltage as high as 1.184 V and fill factor as high as 78.2% as well as the negligible hysteresis. The champion PSC made with DBP gives a PCE of 21.49%, significantly increased compared to 19.68% from the reference cell without the modification. Moreover, DBP also serves as a water-resistant protection for improved moisture stability. The PCE of the DBP-treated cells without encapsulation remains more than 84% of its initial efficiency, which is significantly higher than that of the reference PSCs (65%) after 20 days of storage under an air environment with 50–65% humidity. This study provides an effective interface modification material to address notorious stability problems in Spiro-OMeTAD-based PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12544?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12544</a>.SEM images of the perovskite film treated by different concentrations of DBP; UV–vis spectra of the pristine and DBP-treated perovskite films; XRD patterns of the pristine and DBP-treated perovskite films; time-resolved PL spectra of different kinds of the perovskite films; and further information on device performance, J–V hysteresis, and stability (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12544/suppl_file/am0c12544_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improving Hole Transport and Extraction by Interface Engineering in Perovskite Solar Cells

Interface Modification of a Perovskite/Hole Transport Layer with Tetraphenyldibenzoperiflanthene for Highly Efficient and Stable Solar Cells

Enhanced performance of perovskite solar cells with multifunctional organic interface conditioner

Improving efficiency of polymer hole transport layer based perovskite solar cells via interfacial modification

High-Efficiency Perovskite Solar Cells with Improved Interfacial Charge Extraction by Bridging Molecules

Molecular Design of Hole Transport Materials to Immobilize Ion Motion for Photostable Perovskite Solar Cells

Interface Engineering of Perovskite Solar Cells with Multifunctional Polymer Interlayer Toward Improved Performance and Stability

Buried Interface Modification Toward Efficient Perovskite Solar Cell Based on PVK Hole Transport Layer

Engineering the buried interface in perovskite solar cells via lattice-matched electron transport layer

Enhanced Hole Mobility and Decreased Ion Migration Originated from Interface Engineering for High Quality PSCs with Average FF beyond 80

Molecular Orientation Regulation of Hole Transport Semicrystalline-Polymer Enables High-Performance Carbon-Electrode Perovskite Solar Cells

Enhancing the Performance of Perovskite Solar Cell Via Optimizing the Solvent of Hole Transport Layer

Light Management Through Organic Bulk Heterojunction and Carrier Interfacial Engineering for Perovskite Solar Cells with 23.5% Efficiency

Periphery group engineering in hole transport materials for efficient perovskite solar cells

Boosted Hole Extraction in All-Inorganic CsPbBr3 Perovskite Solar Cells by Interface Engineering Using MoO2/N-doped Carbon Nanospheres Composite

Interface Engineering of Perovskite/Hole Transport Layer Using Nano‐Network Formation in Small Molecule–Polymer Blend for Efficient Inverted Perovskite Solar Cells

Highly Efficient and Stable Perovskite Solar Cells Via a Multifunctional Hole Transporting Material

Tailoring Perovskite Adjacent Interfaces by Conjugated Polyelectrolyte for Stable and Efficient Solar Cells

In Situ Combined‐Hole Transport Layer for Highly Efficient Perovskite Solar Cells

Constructing hole transport channels in the photoactive layer connecting dopant-free hole transport layers to improve the power conversion efficiency of perovskite solar cells

Greatly enhanced power conversion efficiency of hole-transport-layer-free perovskite solar cell via coherent interfaces of perovskite and carbon layers