Abstract:A multi-stage high pressure reducing valve (MSHPRV) is proposed. It can achieve a multi-stage pressure reducing way. Valve failure mainly occurs under high pressure and high temperature conditions, thus it is necessary to investigate the strength of MSHPRV under those complex conditions. In this paper, the mathematical model of MSHPRV is established and Computational Fluid Dynamics (CFD) method is employed to simulate its flow fields and thermo-mechanical stress. Next, the stress of MSHPRV under different opening time and the fatigue damage of MSHPRV under different valve openings are studied. Finally, two changes are provided on geometry of MSHPRV and the geometrical factors are optimized. The results show that, the radial direction from inner wall to outer wall is the main heat transfer direction for valve body. At opening time 50 s, the working condition of MSHPRV is dangerous condition. Meanwhile, the maximum value of thermal stress is 487 MPa, which is located at the upper end face of valve chamber region B3. There is a lag effect of stress distribution with respect to temperature distribution. The combined stress of valve body is composed of thermal stress and mechanical stress, in which thermal stress holds the dominant position. Moreover, with the increasing of valve opening, the fatigue damage of valve body increases correspondingly. It can be concluded that MSHPRV can cope with complex conditions like high pressure and high temperature. In the optimization design of MSHPRV, it can be found that the best strength of MSHPRV is achieved with such geometrical factors as angle 15, diameter 4 mm and 2 stage plates. Besides, radian design as the improved structure is recommended. This work can benefit the further research work on the regulation performance and safe operation of high pressure reducing valve. (C) 2017 Elsevier Ltd. All rights reserved.

Fluid-solid-thermal coupling analysis of an underwater valve

Study on Fluid-Solid Coupling Dynamic Characteristics of Large Wide-Frequency-range Underwater Vibration Tables

FLUID DYNAMICS AND CONTACT STRESS ON HARD SEALING SURFACE ANALYSIS OF LNG CRYOGENIC BALL VALVE

Thermal-fluid-structure coupling analysis for valve plate friction pair of axial piston pump in electrohydrostatic actuator (EHA) of aircraft

Research on Fluid Dynamics and Thermal Characteristics in Hydraulic Valves by Thermal-Fluid-Solid Coupling Method

Simulation and analysis of dynamic heat transfer inside a cryogenic valve under cryogenic test

A Deep-Sea Large-Volume High-Pressure Simulation System—design, Analysis and Experimental Verification

FEA-Based Failure Analysis of a UHP Chamber for Simulation of Deep Sea Conditions

Evaluation of the Viscous Heating Induced Jam Fault of Valve Spool by Fluid–structure Coupled Simulations

Thermo-mechanical Stress Analysis of Feed-Water Valves in Nuclear Power Plants

Three-dimensional computational fluid dynamics simulation of valve-induced water hammer

Numerical Study On Temperature Field And Spool Deformation Of Throttle Slide Valve With V-Notches

Thermal–Structural Coupling Analysis of Subsea Connector Sealing Contact

Dynamic Characteristics Analysis on High Parameter Steam Spring-Loaded Safety Valve

Modal and Structural Analysis on a Main Feed Water Regulating Valve under Different Loading Conditions

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

Technical Research of Three-ultra Globe Valve for Aerospace Application

Fluid–structure coupling modelling and parameter optimization of a direct-acting relief valve for underwater application

Thermo-mechanical Stress and Fatigue Damage Analysis on Multi-Stage High Pressure Reducing Valve

Numerical Simulation of the Head of the Direct Action Solenoid Valve under the High Temperature Condition

Fluid-structure Interaction Analysis of Valve in Pipes