Abstract:Modern laver fluffiness is achieved by applying high-speed gas to a laver, which is generated by the opening and closing of a laver fluffiness control valve in a fluffiness system. To address the problems of the slow response speed and poor stability of valves used in the laver processing industry at present, this paper proposes a novel principle of a high-speed switching control valve, which has the advantages of a fast response speed, high stability, and long service life. The structure and working principle of the control valve are introduced, and the calculation equation of the valve's flow area is established. The flow field inside the control valve with different openings was numerically calculated in this study using Fluent. The flow regulation characteristics and flow field performance of the control valve were also analyzed. The results show that, with an increase in the valve opening, the influence of the flow area at the valve throttle on the valve flow rate was weakened. When the valve was opened, a vortex appeared in both the upper and lower cavities, and jet flow occurred at the throttle of the middle flow channel. As the valve opening increased, the pressure in the upper cavity reduced, while the pressure in the lower cavity increased. The vortex in the flow field intensified, and the jet phenomenon at the valve throttle gradually disappeared. At the same time, the main stream in the lower cavity gradually changed from an annular flow to a direct flow toward the valve outlet. Furthermore, the impact, collision, and vortex formation of the fluid caused energy loss of the fluid, leading to a decrease in the outlet flow of the control valve.

Fluid-structure Interaction Analysis of Valve in Pipes

A Study of Dynamic Characteristics of Valve Control Hydr Aulic System with Long Pipeline

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Modeling and Characteristics Investigation on a Load Control Valve

Fluid-structure interaction analysis on vibration characteristics of sleeve control valve

Three-dimensional computational fluid dynamics simulation of valve-induced water hammer

Fluid Dynamics Investigation on the Body Structure Inside a Sleeve Regulating Valve

Numerical Simulation of the Gas-Solid Flow Around the Valve of Pneumatic Conveying System

Transient Simulation of Valve Core Movement of Pilot-Control Globe Valve in Vertical Pipelines

Experimental and Numerical Analysis of Spring Stiffness on Flow and Valve Core Movement in Pilot Control Globe Valve

Evaluation of the Viscous Heating Induced Jam Fault of Valve Spool by Fluid–structure Coupled Simulations

Computational Analysis Of Fluid-Structure Interaction In Moving Mechanical Valves

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

CFD Analysis on the Dynamic Flow Characteristics of the Pilot-Control Globe Valve

Coupling Analysis Of Fluid-Structure Interaction In Fluid-Filled Elbow Pipe

Fluid-structure Interaction in the Pilot Stage of Flapper-nozzle Hydraulic Servo Valve

FSI DYNAMIC RESPONSE ANALYSES OF A CONICAL ORIFICE VALVE DURING WORKING PROCESS WITH SEVERAL MAJOR INFLUENCES

Flow Dynamic Analysis Inside a Sleeve Regulating Valve with Different Valve Core Shapes

Numerical simulation study on flow switching phenomenon of slide valve based on Fluent

Numerical Study on the Internal Flow Field Characteristics of a Novel High-Speed Switching Control Valve