Abstract:Purpose For moderate pressure and high pressure gear pumps, the temperature failure problem of bearings is now of considerable concern because of their heavy loads. However, the compact structure and the efficiency consideration make it extremely difficult to improve the bearing cooling. A self-circulating oil bearing system is developed for gear pumps with self-lubricating bearings to solve this problem. The oil is aspirated in from the low pressure chamber of the gear pump and discharged to the same chamber by using the pressure difference in the journal bearing, thus achieving the self-circulation. Design/methodology/approach An experiment test rig has been built for the feasibility study. The oil flow rate under different speeds has been recorded. Furthermore, the temperatures of the bearings with or without the oil circulation have been compared. Additionally, the oil flow in the test rig has been simulated using computational fluid dynamics codes. Findings The experimental and numerical results agree well. The experimental results indicate that the oil flow rate increases approximately linearly with the speed and the bearing temperature can be lowered successfully. The calculation results indicate that the bearing load capacity is nearly the same. Both the experimental and numerical studies establish that the self-circulating oil bearing system works successfully. Originality value As far as the authors know, it is the first time to find that the self-circulation can be built using the pressure difference in the bearing oil film, and this principle can be applied in the cooling and lubrication of the gear pumps to solve the temperature failure problem.

Analysis of axial force of double circular arc helical gear hydraulic pump and design of its balancing device

Analysis of force and leakage in water hydraulic motor' s piston pairs

The Design for the Slipper Pair of the Axial Piston Pump Used as a High Pressure Pump in Seawater Desalination

Investigations of the Micro Surface Shape for the Gear-Shaft/journal-bearing Interface in Water Hydraulic Internal Gear Pumps

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Experimental Research on Performance of Water Hydraulic Internal Gear Pump

The design and analysis of a high-speed circular arc gear pump journal bearing

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Numerical analysis of the lubricating gap between the gear shaft and the journal bearing in water hydraulic internal gear pumps

Application analysis and research of cylindrical roller bearing in external gear high pressure pump

Modeling and Analysis of the Tilt Behavior of the Cylinder Block in a High-Speed Axial Piston Pump

Analysis on Oil Film of Hydrostatic Bearing in Gear Pump Operating at High Pressures and High Speeds

Analysis of the Hydrodynamic Lubrication Characteristics of the External Return Spherical Bearing Pair of an Axial Piston Pump/Motor

Numerical and experimental studies on flow performances and hydraulic radial forces of an internal gear pump with a high pressure

A Thermohydrodynamic Analysis of the Self-Lubricating Bearings Applied in Gear Pumps Using Computational Fluid Dynamics Method

Different Hydraulic Pressure Dynamic Characteristics of Balanced Planetary Transmission Gear Pump

Numerical Investigation on the Mechanism of Double-Volute Balancing Radial Hydraulic Force on the Centrifugal Pump

Theoretical Analysis of a Water Hydraulic Internal Ball Gear Pump

Design and Performance Analysis of a Circular-Arc Gear Pump Operating at High Pressure and High Speed

Analysis of vane loads and motion in a hydraulic double vane pump with integrated electrical drive