Research on Bearing Mechanism of Spherical Valve Pairs of Axial Piston Pumps

Shunhai Xu,Chunxiao Zhao,Dian He,Nan Xu,Bin Zhang,Guofang Gong
DOI: https://doi.org/10.3390/act13040147
IF: 2.6
2024-04-15
Actuators
Abstract:The hydraulic system drives the cutter head mechanism to realize the excavation of large tunnel boring equipment, which puts forward the technical requirements of high pressure and large flow to the pump source. The traditional small displacement axial piston pump uses a planar valve plate. However, under high flow and heavy load conditions, the planar valve plate configuration is prone to uneven wear due to the high-pressure and -velocity (PV) value and pressure shock, which ultimately affects the reliability of the system. A simulation analysis of the load-bearing characteristics of the spherical valve plate mechanism is conducted. The Computational Fluid Dynamics (CFD) method was used to construct flow field models for different valve plate oil film structures to calculate differences in their load-bearing capacities. Additionally, the reasons for variations in load-bearing characteristics based on the curvature radius of the spherical valve plate were analyzed. The simulation results demonstrate that the spherical valve plate exhibits superior leak and load-bearing performance compared to the traditional flat valve plate. Furthermore, the curvature radius of the spherical valve plate directly affects the pulsation characteristics of the piston pump. Smaller curvature radii increase the contact area of the oil film, resulting in greater fluctuation in oil film load-bearing, whereas larger curvature radii lead to increased oil film leakage. Using simulation calculations on heavy-load, high-displacement axial piston pumps, it is determined that the optimal curvature radius for stable load-bearing is 350 mm.
engineering, mechanical,instruments & instrumentation
What problem does this paper attempt to address?
This paper mainly discusses the bearing mechanism of spherical valve pair in the axial piston pump. Existing axial piston pumps commonly adopt flat valve plates, but under high pressure and large flow conditions, the flat valve plates are prone to uneven wear caused by high pressure and high speed (PV value) and pressure impact, which affects the system reliability. The study analyzed the bearing characteristics of the spherical valve plate structure through simulation, calculated the differences in load carrying capacity under different valve plate oil film structures, and analyzed the influence of the curvature radius of the spherical valve plate on the pressure-flow characteristics and pulsation characteristics. The results showed that the spherical valve plate is superior to the traditional flat valve plate in terms of leakage and load carrying performance, and the curvature radius directly affects the pulsation characteristics of the pump. The study proposes that a curvature radius of 350 mm can achieve stable bearing effect. In addition, the paper also analyzes the bearing mechanism of the spherical distribution component, discusses the influence of curvature radius parameters on its pressure-flow characteristics, and establishes a fluid dynamics model to optimize the design of the spherical distribution component.