Abstract:Purpose In vitro millifluidic cultures with perfusion are essential tools to analyse and understand the interactions between cells, their matrix and multi-cell populations. The purpose of this paper is to focus on the design and development of a 3D-printed template that can be used for fabrication of a clear view poly (dimethyl siloxane) (PDMS) device. The major objective is to obtain a transparent device prototype that allows perfusion culture of two cell types for multiple days that can be imaged using laser scanning confocal microscopy. Design/methodology/approach The authors used a two-step approach for achieving the final geometric structure at a faster timeline and lower cost. The first part focuses on comparing the fidelity of the printing templates using fused deposition modelling (FDM) and stereolithography (SLA) printers for a range of dimensions. They then show that the complex geometry chip with connection chambers can be printed using low resolution low cost FormLab SLA printer. The final optimized design was then printed using high-resolution Projet 6000 SLA printer to obtain smoother structures. Findings In this work, the authors have shown that the FormLab SLA printer yields significantly lower error for printing complex design geometries as compared to FDM printer. Result shows that FormLab printer can be used to achieve a minimum dimension of 0.5 mm. They then use the printer to optimize the device dimension for the culture chip which requires several iterations of printing and experimenting. They showed the two-step protocol of printing the optimized template in a high-resolution SLA printer and further fabricating a clear view millifluidic PDMS device that is compatible confocal microscopy imaging. They used this culture chip for perfusion culture of two cell type, and the controlled fluidic exchange between the two chambers led to the formation of neuroglia junction. Originality/value One of the major bottlenecks for obtaining complex geometry in mili/microfluidic device by 3D printing is the need of multiple iterations on printing. This makes the tuning of dimension significantly expensive. Another challenge is to obtain a smooth surface of PDMS that leads to a leak proof clear view device compatible for laser based confocal imaging. The combination of two printers plays a crucial role for the rapid prototyping of the imaging device with flow control. The proposed approach lowers the cost for prototyping of in vitro culture chip with complex geometries to improve on biological research demanding multi-chamber fluidic device.

Systematically Studying Dissolution Process of 3D Printed Acrylonitrile Butadiene Styrene (ABS) Mold for Creation of Complex and Fully Transparent Polydimethylsiloxane (PDMS) Fluidic Devices

3D printed mold leachates in PDMS microfluidic devices

Fabrication and Functionalization of 3D Printed Polydimethylsiloxane‐Based Microfluidic Devices Obtained through Digital Light Processing

Fabrication of 3D-printed molds for polydimethylsiloxane-based microfluidic devices using a liquid crystal display-based vat photopolymerization process: printing quality, drug response and 3D invasion cell culture assays

Low-Viscosity Polydimethylsiloxane Resin for Facile 3D Printing of Elastomeric Microfluidics

Two-step fabrication of clear view SLA millifluidic device for long-term in-vitro cultures

3D printing of release-agent retaining molds

Advancing optical transparency in 3D‐printed PLA parts using chemical post‐processing

Fabrication of a Three-Dimensional Microfluidic System from Poly(methyl methacrylate) (PMMA) Using an Intermiscibility Vacuum Bonding Technique

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Polymer Microchannel and Micromold Surface Polishing for Rapid, Low-Quantity Polydimethylsiloxane and Thermoplastic Microfluidic Device Fabrication

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips

PDMS Curing Inhibition on 3D-Printed Molds: Why? Also, How to Avoid It?

Achieving biocompatibility and tailoring mechanical properties of SLA 3D printed devices for microfluidic and cell culture applications

Development of a Custom-Made 3D Printing Protocol with Commercial Resins for Manufacturing Microfluidic Devices

Intermediate layer-based bonding techniques for polydimethylsiloxane/digital light processing 3D-printed microfluidic devices

Facile Route for 3D Printing of Transparent PETg-Based Hybrid Biomicrofluidic Devices Promoting Cell Adhesion

Laser‐Assisted Direct Ink Writing for High‐Fidelity Fabrication of Elastomeric Complex Structures

The Additive Manufacturing Approach to Polydimethylsiloxane (PDMS) Microfluidic Devices: Review and Future Directions

Fabrication of PDMS microfluidic devices using nanoclay-reinforced Pluronic F-127 as a sacrificial ink

Fabrication and Demonstration of a 3D-printing/PDMS Integrated Microfluidic Device