Abstract:Calculating disc cutter wear and predicting wear life are long-standing issues affecting the efficiency and cost of tunnel boring machines (TBMs). During the TBM excavation process, the wear of the disc cutter is a comprehensive outcome of the interaction between the tool and rock. Studying the mechanisms of tool rock breaking and wear can assist in developing a more precise model for predicting cutter wear. Therefore, based on the rock-breaking and wear mechanisms of a cutter, this study developed a model for predicting the cutter wear rate and life. The model is based on the theory of dense core–cavity expansion combined with the motion state of a cutter. First, the TBM excavation process and rock-breaking mechanism of a cutter were analyzed in detail. A cutting force model under the compression shear failure mode based on the dense core–cavity expansion theory was established. Based on the force model, a prediction model for the wear rate and life of the disc cutter was established, considering the working characteristics and wear mechanism. Furthermore, the impact of penetration on the prediction model was investigated. In addition, to demonstrate the practicality of the method, this study conducted a comprehensive examination using engineering examples. The results showed that the average difference in the cutter average wear rate using the developed model was less than 3% compared with the actual engineering result. In addition, the average difference in the wear life rate was less than 5%. Finally, the developed prediction method was compared with other models. The wear rate fitting accuracy was improved by 4.91–10.85% and the wear life fitting accuracy was improved by 5.11–12.19% by the developed method. This improvement confirms the reasonableness and reliability of the method. This method can estimate the wear rate and lifespan of a cutter more accurately and reliably than other methods, providing a practical tool to TBM engineers to make informed decisions and optimize tool replacement programs.

Effect of Blade Angles on the Shovel Muck Capacity and Wear Characteristics for TBM Scraper

Performance Evaluation of TBM Using an Improved Load Prediction Model

The energy method to predict disc cutter wear extent for hard rock TBMs

New soil abrasion testing method for evaluating the influence of geological parameters of abrasive sandy ground on scraper wear in TBM tunneling

A New Calculation Model of Cutterhead Torque and Investigation of Its Influencing Factors

Experimental Study on Partial Wear of TBM Disc Cutter

Research on Numerical Simulation of Rock Breaking Using Tbm Disc Cutters Based on Udec Method

Effect of Impact-Sliding Angle on the Wear Performance of the H13 Steel of a Tunnel Boring Machine Cutter

Enhanced Wear Prediction of Tunnel Boring Machine Disc Cutters for Accurate Remaining Useful Life Estimation Using a Hybrid Model

Experimental Investigation on the Influence Factors on TBM Cutter Wear Based on Composite Abrasion Test

Evaluation of TBM Cutter Wear in Granite and Developing a Cutter Life Prediction Model for Face Cutters Based on Field Data: A Case Study

FEM Analysis on the TBM Scraper-Soil Interaction Process Based on Drucker-Prager

Experimental study on the influence mechanism of soil additives on scraper wear during EPB-TBM tunnelling in abrasive sandy ground

Analytical Research on the Wear Mechanism of TBM Disc Cutters Based on an Energy Approach

Influence of Geological Properties and Operational Parameters on TBM Muck Removal Performance for Yinsong Tunnel

Prediction of TBM Cutter Wear in Heterogeneous Ground under High Ambient Pressure

Development of a Prediction Model for the Wear Evolution of Disc Cutters on Rock TBM Cutterhead

Force and wear prediction model of disc cutter under compression shear failure mode based on dense core–cavity expansion theory (U-713)

Prediction model for disc cutter wear during hard rock breaking based on plastic removal abrasiveness mechanism

The Derivation and Validation of TBM Disc Cutter Wear Prediction Model

A Wear Rule and Cutter Life Prediction Model of a 20-in. TBM Cutter for Granite: A Case Study of a Water Conveyance Tunnel in China