Abstract:Linear PCL (poly(epsilon-caprolactone)), SAN (styrene-acrylonitrile copolymer) and TAIC (triallyl isocyanurate) were melt blended, and the blends were then subjected to different doses of electron beam irradiation to prepare three series of crosslinked PCL and PCL/SAN blends with different gel contents. The crosslinked PCL/SAN blends were observed by a phase-contrast optical microscope (PCOM), which disclosed that phase separation did not occur, indicating that PCL and SAN components were miscible. Differential scanning calorimetry (DSC) was applied to study isothermal crystallization kinetics of crosslinked PCL and PCL/SAN blends. It was found that for the samples with close crosslinking degrees, the crystallization kinetics of the samples became significantly slower with increasing SAN content. When the SAN contents in the blends were the same, the crystallization rate became slower as the degree of crosslinking increased. For the blends with close degrees of crosslinking, the linear portion and the crosslinked portion were separated from the crosslinked blends, and the study on their respective crystallization kinetics by using DSC and polarized light microscope (POM) revealed that it was the incorporated SAN component rather than the crosslinked network that mainly contributed to the slowdown of crystallization rate of PCL in the crosslinked blends. Furthermore, the non-isothermal crystallization behaviors of the crosslinked blends during the cooling process verified the above conclusion.

Influence of Solid TAIC on Crosslinking LLDPE by Electron Beam Radiation

Free-radical Crosslinking Copolymerization of Methyl Methacrylate/Triallyl Isocyanurate

The Effects of Irradiation Cross-Linking on the Thermal Degradation and Flame-Retardant Properties of the Hdpe/Eva/Magnesium Hydroxide Composites

Effect of Electron Beam Irradiation on the Mechanical and Thermal Properties of Ternary Polyamide Copolymer

Influence of Crosslinking on Rheological Properties, Crystallization Behavior and Thermal Stability of Poly(lactic acid)

Effects of Radiation-Induced Crosslinking on Thermal and Mechanical Properties of Poly(lactic Acid) Composites Reinforced by Basalt Fiber

INFLUENCE OF RADIATION CROSSLINKING ON THE STABILITY OF PTC EFFECT OF LDPE/CB COMPOSITES

Effects of Electron Irradiation on LDPE/MWCNT Composites

Evaluation of Cross-Linked Polyamide 6 Micro-Indentation Properties: TAIC Concentration and Electron Radiation Intensity

Rheological and Topological Characterizations of Electron Beam Irradiation Prepared Long‐chain Branched Polylactic Acid

Photocrosslinking of LDPE and Its Application for Wires and Cables.

Effect of photocrosslinking on the gel content of polyethylene

Molecular and thermo-mechanical assessment of long-chain branched polypropylene: Effect of irradiation dose, multifunctional monomer content and molecular weight

Effect of Electron Beam Irradiation on Thermal and Mechanical Properties of Polyamide Copolymer/Multiwall Carbon Nanotube Composites

Preparation and Characterization of High-Melt-Strength Polylactide with Long-Chain Branched Structure Through Γ-Radiation-induced Chemical Reactions

Study On Crystallization Kinetics Of Crosslinked Poly(Epsilon-Caprolactone)/Styrene-Acrylonitrile Copolymer Blends Prepared Through Irradiation By Electron Beam

Miscibility, thermal characterization and crystallization of poly(l-lactide) and poly(tetramethylene adipate-co-terephthalate) blend membranes

Photoinitiated Crosslinking of Ethylene-Vinyl Acetate Copolymers and Characterization of Related Properties

Effect of Electron Beam Irradiation on the Thermal and Mechanical Properties of Ethylene-Vinyl Acetate Copolymer/polyamide Blends

Effect of 110 keV electrons on the deformation mechanisms of low density polyethylene

Effects of Polymerization and Crosslinking Technologies on the Crystallization Behaviors and Gel Network of Crosslinked Polyethylene