Abstract:The kinetic characteristics and the reaction conditions of photocross-linking of tow-density polyethylene (LDPE) in the melt have been studied using benzophenone (BP) and its derivatives such as 4-chlorobenzophenone (4-CBP) as photoinitiator and triallyl cyanurate (TAC) as cross-linker. The efficiency of the photoinitiated cross-linking system LDPE-BP-TAC and various factors affecting the cross-linking process, such as photoinitiator and cross-linker and their concentrations, irradiation time, temperature, and atmosphere, and UV light intensity were examined extensively by determining gel content, IR, and UV spectra. It has been found (i) that LDPE samples of 2-3 mm thickness are easily cross-linked to a gel content of about 70% with a UV-irradiation time of about 15 s under optimum conditions; (ii) that the photoinitiating system of a suitable initiator combined with a multifunctional cross-linker such as 4-CBP-TAC can enhance the efficiency of photocrosslinking reactions, especially by increasing the initial rate of cross-linking; (iii) that photocross-linking of LDPE should be carried out in the melt, which increases the penetration of UV light by decreasing the scattering by crystallites, and (iv) that the rate of cross-linking is proportional to the square of the light intensity. An increase in light intensity can decrease the concentration of photoinitiator required to reach a certain rate of cross-linking. The photocross-linking of polyethylene is promising for industrial applications.

Effect of photocrosslinking on the gel content of polyethylene

Photocross-linking of low-density polyethylene. I. Kinetics and reaction parameters

The Effects of Irradiation Cross-Linking on the Thermal Degradation and Flame-Retardant Properties of the Hdpe/Eva/Magnesium Hydroxide Composites

Photoinitiated Crosslinking of Ethylene-Vinyl Acetate Copolymers and Characterization of Related Properties

Photocrosslinking of an Ethylene–propylene–diene Terpolymer and the Characterization of Its Structure and Mechanical Properties

Effects of Polymerization and Crosslinking Technologies on the Crystallization Behaviors and Gel Network of Crosslinked Polyethylene

Effect of UV-photocrosslinking on the nonisothermal crystallization kinetics of polyethylene

Photocross‐linking of Low‐density Polyethylene. II. Structure and Morphology

13C NMR Studies of Photoinitiated Cross-Linking of Low-Density Polyethylene

Surface Photo-oxidation and Photostabilization in Photoinitiated Crosslinking of Polyethylene

Effects of crystallization temperature on crystallinity and melting behavior of photocross-linked polyethylene

Photoinitiated Crosslink Structures and Mechanisms of Low Density Polyethylene

Study on Factors Influencing Gel Content of Polyethylene Crosslinked with Silane

The effect of chemical crosslinking on the properties of Rotomolded high density polyethylene

Photoinitiated Crosslinking of EPDM/inorganic Filler Blends and Characterization of Related Properties

Preparation and characterization of photocrosslinking EVA by UV irradiation

Photoinitiating Characteristics of Benzophenone Derivatives As New Initiators in the Photocrosslinking of Polyethylene

Photocrosslinking of LDPE and Its Application for Wires and Cables.

EFFECTS OF CROSSLINKING AGENTS ON RADIATION CROSSLINKING OF LLDPE/EPDM BLENDS

13C NMR Studies on photoinitiated crosslinks of LDPE model compounds

Effect of the Cross-Linking Agent on the Cross-Linking Degree and Electrical Properties of Cross-Linked Polyethylene