Abstract:Electrical properties and electro-thermal behavior were studied in composites with carbon black (CB) or hybrid filler (CB and graphite) and a matrix of linear low-density polyethylene (LLDPE). LLDPE, a (co)polymer with low crystallinity but with high structural regularity, was less studied for Positive Temperature Coefficient (PTC) applications, but it would be of interest due to its higher flexibility as compared to HDPE. Structural characterization by scanning electron microscopy (SEM) confirmed a segregated structure resulted from preparation by solid state powder mixing followed by hot molding. Direct current (DC) conductivity measurements resulted in a percolation threshold of around 8% (w) for CB/LLDPE composites. Increased filler concentrations resulted in increased alternating current (AC) conductivity, electrical permittivity and loss factor. Resistivity-temperature curves indicate the dependence of the temperature at which the maximum of resistivity is reached (Tmax(R)) on the filler concentration, as well as a differentiation in the Tmax(R) from the crystalline transition temperatures determined by DSC. These results suggest that crystallinity is not the only determining factor of the PTC mechanism in this case. This behavior is different from similar high-crystallinity composites, and suggests a specific interaction between the conductive filler and the polymeric matrix. A strong dependence of the PTC effect on filler concentration and an optimal concentration range between 14 and 19% were also found. Graphite has a beneficial effect not only on conductivity, but also on PTC behavior. Temperature vs. time experiments, revealed good temperature self-regulation properties and current and voltage limitation, and irrespective of the applied voltage and composite type, the equilibrium superficial temperature did not exceed 80 °C, while the equilibrium current traversing the sample dropped from 22 mA at 35 V to 5 mA at 150 V, proving the limitation capacities of these materials. The concentration effects revealed in this work could open new perspectives for the compositional control of both the self-limiting and interrupting properties for various low-temperature applications.

INFLUENCE OF RADIATION CROSSLINKING ON THE STABILITY OF PTC EFFECT OF LDPE/CB COMPOSITES

Effects of different treatments on the interface and mechanical properties of high density polyethylene reinforced by sericite-tridymite-cristobalite

THE INFLUENCE OF RADIATION EFFECT ON THE ELECTRICAL RESISTIVITY OF LDPE/CB COMPOSITES

RESEARCH AND DEVELOPMENT OF RADIATION CROSSLINKING INFLUENCE ON POLYMER/CARBON BLACK CONDUCTIVE COMPOSITES

The Effects of Irradiation Cross-Linking on the Thermal Degradation and Flame-Retardant Properties of the Hdpe/Eva/Magnesium Hydroxide Composites

LDPE/carbon black conductive composites: Influence of radiation crosslinking on PTC and NTC properties

Influence of Radiation Structures on Positive‐temperature‐coefficient and Negative‐temperature‐coefficient Effects of Irradiated Low‐density Polyethylene/carbon Black Composites

Effects of Carbon Black Content on Microwave Absorbing and Mechanical Properties of Linear Low Density Polyethylene/Ethylene-Octene Copolymer/Calcium Carbonate Composites

High‐density Polyethylene/carbon Black Conductive Composites. II. Effect of Electron Beam Irradiation on Relationship Between Resistivity–temperature Behavior and Volume Expansion

Investigation Of Microstructure And Conductive Mechanism Of High Density Polyethylene/Carbon Black Particle Composite By Positron Annihilation Lifetime Spectroscopy

PTC Behavior and its Stability for High Density Polyethylene/Graphite Composites

Conduction Stability of High-Density Polyethylene/Carbon Black Composites Due to Electric Field Action

Electrical and Electro-Thermal Characteristics of (Carbon Black-Graphite)/LLDPE Composites with PTC Effect

The electric self-heating behavior of carbon black loaded high density polyethylene composites

Nonlinear Conductive Properties and Scaling Behavior of Conductive Particle Filled High-Density Polyethylene Composites

The Influence of Mold Pressing Parameters on Ptc of Hdpe/Cb Composites

Preparation and PTC properties of multilayer graphene/CB/HDPE conductive composites with different cross-linking systems

Radiation Degradation of Polytetrafluoroethylene-Lead Composites

Influence of Irradiation Crosslinking on Time Dependences of Conduction and Self‐heating in Acetylene Carbon Black Filled High‐density Polyethylene Composites

Radiation Cross-Linking of Polyethylene with Electron-Beam at Different Temperatures

Electrical Resistivity‐temperature Characteristics Enhancement of Insulating Cross‐linked Polyethylene Composites by Incorporating Positive Temperature Coefficient Particles with Different Curie Temperatures