Abstract:In situ compressive behavior of carbon fibers reinforced PPS laminates. This study investigates the influence of a combined thermal heat flux (imposed by a cone calorimeter) and a compressive loading on the deformation and damage mechanisms within quasi‐isotropic carbon fibers reinforced thermoplastic (polyetherether ketone [PEEK] and polyphenylene sulfide [PPS]) and thermosetting (epoxy) laminates. First, thermogravimetric Analyses conducted under nitrogen provide valuable information on the thermal decomposition of these materials depending on the matrix nature (580–510°C and 350°C, respectively) which is a key factor to explain the mechanical behavior under fire conditions. Second, under the same testing conditions (creep loading under a 50 kW/m2 heat flux), the time to failure is about 17 times as high (C/PEEK), twice as high (C/PPS) with respect to C/epoxy laminates. At the ply scale, the exposure of thermoplastic matrices (PEEK and PPS) to a 50 kW/m2 heat flux causes softening and thermal decomposition, facilitating the micro‐buckling of fiber bundles in matrix‐rich areas. At the laminates scale, this mechanism ultimately leads to the formation and propagation of plastic kink bands in the transverse direction. In epoxy‐based laminates, the onset of matrix pyrolysis occurs at lower temperatures (350°C) during thermal aggression, and thermal decomposition has started in all the plies of the laminates. Combined with the low ductility of the epoxy matrix, the compressive response is elastic‐brittle and results from the buckling of 0° plies outside the thermally‐damaged area. Highlights Study on the compression of polymer composites exposed to a 50 kW/m2 heat flux. The influence of the matrix nature (thermoplastic vs thermoset) is discussed. Time to failure is about 17 times higher in C/PEEK compared to C/Epoxy. Plastic kink bands propagate in thermoplastic composites at T > Tg. C/Epoxy laminates undergo buckling outside the thermally damaged area.

Influence of Irradiation Crosslinking on Time Dependences of Conduction and Self‐heating in Acetylene Carbon Black Filled High‐density Polyethylene Composites

The Effects of Irradiation Cross-Linking on the Thermal Degradation and Flame-Retardant Properties of the Hdpe/Eva/Magnesium Hydroxide Composites

Nonlinear Conduction of Irradiation‐crosslinked High‐density Polyethylene/acetylene Carbon Black Composites at the Electric–thermal Equilibrium State

The electric self-heating behavior of carbon black loaded high density polyethylene composites

Comparison of the in situ compressive behavior of carbon fibers woven ply laminates exposed to one‐sided heat flux: Thermoplastic versus thermosetting composites

Influence of Irradiation Conditions on the Electrical Behavior of Polyethylene-Carbon Black Conductive Composites

LDPE/carbon black conductive composites: Influence of radiation crosslinking on PTC and NTC properties

High‐density Polyethylene/carbon Black Conductive Composites. II. Effect of Electron Beam Irradiation on Relationship Between Resistivity–temperature Behavior and Volume Expansion

Influence of Radiation Structures on Positive‐temperature‐coefficient and Negative‐temperature‐coefficient Effects of Irradiated Low‐density Polyethylene/carbon Black Composites

Influence of Annealing on Rheological and Conductive Behaviors of High-Density Polyethylene/carbon Black Composites

Conduction Stability of High-Density Polyethylene/Carbon Black Composites Due to Electric Field Action

Effect of Voltage on the Conduction of a High-Density Polyethylene/carbon Black Composite at the NTC Region

Effect of Radiation-Induced Cross-Linking on Thermal Aging Properties of Ethylene-Tetrafluoroethylene for Aircraft Cable Materials

Study on Time-Dependent Resistance of Carbon Black-Loaded High-Density Polyethylene Composites During the Isothermal Course

Reversible Nonlinear Conduction in High‐density Polyethylene/acetylene Carbon Black Composites at Various Ambient Temperatures

RESEARCH AND DEVELOPMENT OF RADIATION CROSSLINKING INFLUENCE ON POLYMER/CARBON BLACK CONDUCTIVE COMPOSITES

INFLUENCE OF RADIATION CROSSLINKING ON THE STABILITY OF PTC EFFECT OF LDPE/CB COMPOSITES

Radiation Cross-Linking of Polyethylene with Electron-Beam at Different Temperatures

Morphology and electro-thermal characteristics of polyethylene self-limited temperature heating composite

Nonlinear Conductive Properties and Scaling Behavior of Conductive Particle Filled High-Density Polyethylene Composites

Investigation Of Microstructure And Conductive Mechanism Of High Density Polyethylene/Carbon Black Particle Composite By Positron Annihilation Lifetime Spectroscopy