Abstract:This paper reports the development of a sapphire (�� - Al 2O 3) single crystal optical fiber thermometer using two wavelength bands. A thin film of precious metal or ceramic deposited onto one end of the sapphire fiber forms a mini-radiation cavity. The other end of the sapphire fiber is coupled to a low-loss silica fiber. Radiation from the small cavity is transmitted along the silica fiber into a photodetection system which consists of a lens, beam splitter, two interference filters (820 nm and 940 nm center wavelength, 30 nm bandwidth) and two silicon photocells. The temperature measurement is based on the detection of radiation from the small cavity. The sapphire fiber (0.25 - 1.0 mm diameter, 100 - 450 mm length) was grown by the laser heated pedestal growth (LHPG) methods. Transmission loss in the sapphire fiber was experimentally measured. Theoretical analysis shows the apparent emittance of the small cavity with a length to diameter (L/D) ratio greater than eight is a constant value near to one, so the small cavity can be considered as a small black-body cavity. Using the developed sapphire fiber temperature sensor, we have built a sapphire fiber thermometer based on a 8098 single-chip microcomputer system. It was calibrated at some known stable temperature point and uses the fundamental radiation law to extrapolate to other temperatures. By taking the ratio of the optical power at two wavelengths, errors due to changes in the system, such as emissivity and transmission losses, can be canceled out. The thermometer has an operating temperature range of 800 to 1900 degrees Celsius, and an accuracy of 0.2% at 1000 degrees Celsius. There are a number of applications of the thermometer both in science and industry.

Design, construction and traceable calibration of a phosphor-based fibre-optic thermometer from 0 °C to 650 °C

Sapphire-ruby single-crystal fibre for application in high temperature optical fibre thermometers: Studies at temperatures up to 1500 °C

Sapphire-Fiber Thermometer Ranging from 20 to 1800 °C

Development Of A Sapphire Fiber Thermometer Using Two Wavelength Bands

Fiber temperature sensor based on rare earth fluorescence material

Miniature Uncooled and Unchopped Fiber Optic Infrared Thermometer for Application to Cutting Tool Temperature Measurement

A Sapphire Fiber Thermometer for High Temperature Measurement in Tundish Based on the Fast Fourier Transform

Traceable thermal imaging in harsh environments

Yb,Er,Tm:Sc2O3 Single Crystal Fibers for Multi-Mode Optical Thermometry

The Technique of Doped Optical Fiber Thermometer Based on Fluorescence Lifetime Measurement

Packaging and precision testing of fiber-Bragg-grating and silicon ring-resonator thermometers: current status and challenges

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

A Zirconia Single-Crystal Fibre-Optic Sensor for Contact Measurement of Temperatures above 2000 °C

Novel Sapphire Fiber Thermometer Using Fluorescent Decay

Development of hyperthermia measurable fiber radiometric thermometer for thermotherapy

LED Pump Sapphire Optical Fiber Thermometer Based on Fluorescence Lifetime Measurement

Development of Hyperthermia Measurable Fiber Radiometric Thermometer for Monitoring Tissue Temperature during Thermo-therapy

Characterization of an optical fiber thermometer using Tm3+:YAG crystal, based on the fluorescence lifetime approach

Temperature Measurement Using Optical Fiber Methods: Overview and Evaluation

Preparation and Performance of a Fiber Optic Temperature Sensor with Multiple Fluorescence Mechanisms

Manipulable Multipurpose Nanothermometers Based on a Fluorescent Hybrid Glass Fiber Microsphere Cavity