Abstract:This paper reports the development of a sapphire (�� - Al 2O 3) single crystal optical fiber thermometer using two wavelength bands. A thin film of precious metal or ceramic deposited onto one end of the sapphire fiber forms a mini-radiation cavity. The other end of the sapphire fiber is coupled to a low-loss silica fiber. Radiation from the small cavity is transmitted along the silica fiber into a photodetection system which consists of a lens, beam splitter, two interference filters (820 nm and 940 nm center wavelength, 30 nm bandwidth) and two silicon photocells. The temperature measurement is based on the detection of radiation from the small cavity. The sapphire fiber (0.25 - 1.0 mm diameter, 100 - 450 mm length) was grown by the laser heated pedestal growth (LHPG) methods. Transmission loss in the sapphire fiber was experimentally measured. Theoretical analysis shows the apparent emittance of the small cavity with a length to diameter (L/D) ratio greater than eight is a constant value near to one, so the small cavity can be considered as a small black-body cavity. Using the developed sapphire fiber temperature sensor, we have built a sapphire fiber thermometer based on a 8098 single-chip microcomputer system. It was calibrated at some known stable temperature point and uses the fundamental radiation law to extrapolate to other temperatures. By taking the ratio of the optical power at two wavelengths, errors due to changes in the system, such as emissivity and transmission losses, can be canceled out. The thermometer has an operating temperature range of 800 to 1900 degrees Celsius, and an accuracy of 0.2% at 1000 degrees Celsius. There are a number of applications of the thermometer both in science and industry.

Development of hyperthermia measurable fiber radiometric thermometer for thermotherapy

Development of Hyperthermia Measurable Fiber Radiometric Thermometer for Monitoring Tissue Temperature during Thermo-therapy

Sapphire-ruby single-crystal fibre for application in high temperature optical fibre thermometers: Studies at temperatures up to 1500 °C

Development Of A Sapphire Fiber Thermometer Using Two Wavelength Bands

Yb,Er,Tm:Sc2O3 Single Crystal Fibers for Multi-Mode Optical Thermometry

Sapphire-Fiber Thermometer Ranging from 20 to 1800 °C

A Sapphire Fiber Thermometer for High Temperature Measurement in Tundish Based on the Fast Fourier Transform

Miniature Uncooled and Unchopped Fiber Optic Infrared Thermometer for Application to Cutting Tool Temperature Measurement

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Self-monitored and optically powered fiber-optic device for localized hyperthermia and controlled cell death in vitro

Sapphire Optic Fiber Thermometer for High Temperature in Tundish

Fiber temperature sensor based on rare earth fluorescence material

Fiber Thermometer Based on the Cross Detection of the Fluorescence Decay of Tm:YAG Crystal Fiber and Background Radiation

A Zirconia Single-Crystal Fibre-Optic Sensor for Contact Measurement of Temperatures above 2000 °C

Fiber Thermometer Based on the Cross Detection of the Fluorescence Lifetime of Cr3+:YAG Crystal Fiber and Plank"s Blackbody Radiation from Cryogenic Up to 1400°C

High-sensitivity Ratiometric Thermometers of Yb 3+/er 3+/tm 3+Co-Doped LuScO 3 Single Crystal Fibers Based on Non-Thermally Coupled Energy Levels

Characterization of an optical fiber thermometer using Tm3+:YAG crystal, based on the fluorescence lifetime approach

Manipulable Multipurpose Nanothermometers Based on a Fluorescent Hybrid Glass Fiber Microsphere Cavity

A High-Sensitivity Temperature Sensor Based on a Liquid Cladding Tapered Microfiber

A novel high precision weighted integral ratio algorithm for fluorescent optical fiber temperature sensor

Temperature Sensing in Hyperthermia Study in Breast Cancer Treatment Using Optical Fiber Bragg Gratings