Abstract:As a classic bridge type, cable-stayed bridge is widely used because of its superior spanning capacity. Based on the mechanical characteristics of stay cable supporting deck, we propose a novel mechanical model aiming to evaluate the vertical bending stiffness of a floating cable-stayed bridge, namely, multi-beam model with discrete springs. First, a single-tower cable-stayed bridge is modeled as a triple-beam model with discrete springs in order to introduce the novel method easily. In this model, the stay cables are simplified as springs without mass and the single tower is regarded as an Euler–Bernoulli beam with consideration of the effect of axial force. At the same time, the bridge deck has been cut into two Euler–Bernoulli beams at the intersection of a deck and a tower. Then equations governing vibrations of the beam and tower are derived according to Hamilton’s principle for dynamic problems in elastic body under equilibrium state. The program is established by transfer matrix method to solve the eigenvalues of the system along with its boundary and matching conditions. Thus, the vertical bending stiffness of the floating cable-stayed bridge can be evaluated based on the frequency. In addition, the influences of the cables’ material, location, stiffness and number on vertical bending stiffness are analyzed in detail when the steel cables are replaced with CFRP cables. Lastly, the same method is directly extended to modeling the floating multi-tower cable-stayed bridge. The results, which are validated by commercial finite element software, demonstrate that the proposed mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.

Planar nonlinear dynamic analysis of cable-stayed bridge considering support stiffness

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Nonlinear Dynamic Response of Stay Cables under Axial Harmonic Excitation

Modeling, dynamics, and parametric studies of a multi-cable-stayed beam model

Modeling and Nonlinear Dynamic Analysis of Cable-Supported Bridge with Inclined Main Cables

NONLINEAR DYNAMICS OF CABLE-STAYED ARCH UNDER CABLES SUBJECTED TO EXTERNAL EXCITATION

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

Dynamic modeling and analysis on planar free vibration of long-span arch bridges during construction

Modeling and Parametric Analysis of In-Plane Free Vibration of a Floating Cable-Stayed Bridge with Transfer Matrix Method

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Non-Linear Dynamic Analysis on a Continuum Suspension Bridge Model with Spatial Layout of Main Cables

Analysis of Dynamic Characteristics of Cable-stayed Bridges with Open Sections and Double Cable Planes

Nonlinear Dynamics Analysis of Active Control System for Parametric Vibration of Super-Long Stay Cable Coupled with Bridge Vibration

Dynamic Response Analysis of Cable-stayed Bridges Subjected to Moving Load

Nonlinear Analysis of Cable Vibration of a Multispan Cable-Stayed Bridge under Transverse Excitation

Parametrically excited oscillation of stay cable and its control in cable-stayed bridges

Stability and Dynamics Analysis of In-Plane Parametric Vibration of Stay Cables in a Cable-Stayed Bridge with Superlong Spans Subjected to Axial Excitation

Modeling and Analysis of the In-Plane Vibration of a Complex Cable-Stayed Bridge

Full Range Nonlinear Aerostatics Analysis for Long-Span Cable-Stayed Bridge